Hello all,
My wife and I are converting a 92 35 foot bluebird. I received it partially converted. Wiring was ran, just not hooked up. The guy I bought it from had an older 30 amp power converter from General Dynamics. It has 12v, 110, and a battery charger on it. I am confused as all get out though when the last breaker on the main was a 15 amp breaker from Bryant (type BR a-947)...I am not sure if it was improvised to be used in the manner it seemed, or if it is meant to be because i cant find any information on it at all! It looks like a double pole, but it has a side where a neutral is stuck in and says it goes to the panel I believe...and there are two load ports for it... there are wires coming out of the power converter where (i assume) the 110 is turned into 12 v and they were shoved into this breaker.... now I'm just trying to rewire with my current set up, but have no idea... I have the schematics for my power converter, but cant seem to find where it says anything about this part... (at least talking any type of specifics) the link to the schematics are here if interested:
http://www.progressivedyn.com/pdfs/PDI% ... 710778.pdf
Its just really confusing, and its the only thing holding me up. I had a guy coming out to help today who has done a couple skoolie conversions, but as is the case, the day of you mysteriously cant get a hold of anyone...
Thanks for the help in advance!
Ryan