Here are some pics of my "3rd" door set up.

__________________
In search of Bus #2
(Sold)1989 Chevy Thomas 8.2 Detroit Allison AT545 Custom 3rd door added in back.
GM Service Tech

Thank you. When you cut through the body, did you fold the outer skin in? I'm just wondering how you closed off the outer and inner skin.

__________________
I'm hungry!

You Gotta Let Me Fly

Where do those wires in the last picture go?

__________________
View my 1972 Ward: Topic from the Build : The Picture Gallery
View my 1986 Blue Bird: Topic from the Build : The Picture Gallery
View my 1960 GMC: Topic from the Build : The Picture Gallery

I had a friend of mine measure and have some sheet metal bent/ formed for the open edges on the body and door.
Its kindof hard to see but one the door there are U shaped channels of sheet metal that just slipped over the door skin and I welded them inplace.

The wires are for the tail/brake lights in that door. The oridional wiring ran down the roof into the door so I needed to extend them temporarily so i can open the door and still have lights. I will comeup with a better solution eventually but it works for now.

__________________
In search of Bus #2
(Sold)1989 Chevy Thomas 8.2 Detroit Allison AT545 Custom 3rd door added in back.
GM Service Tech