|
09-12-2007, 12:28 PM
|
#1
|
New Member
Join Date: Sep 2007
Posts: 4
Year: 1952
Coachwork: Wayne
Chassis: Chevrolet
Engine: 5.7 Proposed
Rated Cap: 12
|
How to inspect OLD bus before buying
I am days away from writing out a substantial check for a 1952 Wayne/Chevy short bus. It was converted probably before I was born, and has been sitting in a pasture for the last twenty years. The conversion is absolute trash. My specific question is, on a bus of this vintage, what are the hidden issues? Is this a double wall body that can trap moisture and rust from the inside out? Where do I start to look?
A check list would be great-
Motor/trans running gear will get upgraded so I'm not real concerned about all that business; my concerns would be any vintage Wayne body issues.
Great site, learned alot already!
Thanks in advance-
Paul
http://www.flickr.com/photos/13278824@N03
|
|
|
09-12-2007, 03:15 PM
|
#2
|
Bus Geek
Join Date: Feb 2006
Location: Saint James, MN
Posts: 2,669
|
Re: How to inspect OLD bus before buying
Gorgeous...truly gorgeous.
Mechanically I'm not sure what your plans are, but it would seem to me that the vast majority of people end up repowering those older rigs with something a bit more modern.
I would spend a lot of time accessing the actual coachwork. I guess if I were picking up something that old I wouldn't worry TOO much about what the interior looks like or wiring or that kind of stuff, but I think the sheetmetal and framing would be of interest to me. Framing could almost be fabricated to work if the need was there I guess, but the sheetmetal and the special, unique little hardware stuff...well....it might not be replaceable.
How much of a project are you looking for? What's the plan? I'm jealous of that find, no matter the condition.
|
|
|
09-12-2007, 03:33 PM
|
#3
|
New Member
Join Date: Sep 2007
Posts: 4
Year: 1952
Coachwork: Wayne
Chassis: Chevrolet
Engine: 5.7 Proposed
Rated Cap: 12
|
Re: How to inspect OLD bus before buying
The plan is to build a clean "retro-rod" with modern powertrain. I have seen a few posts about trapped moisture and it got me worried. This thing seems like its built out of boiler plate, but rust can take anything down in time...
Most of the hardware is present. The conversion that exists is going straight into the dumpster. I wish I could look under the flooring and behind the cabinets, but I don't think this guy is going to let me dismantle the old girl out in the pasture.
|
|
|
09-12-2007, 03:48 PM
|
#4
|
Bus Crazy
Join Date: Jul 2002
Location: Central Iowa
Posts: 1,839
|
Re: How to inspect OLD bus before buying
The good news on these old buses is that rust is easy to repair given most of the metal is flat. Look under the rubber floor on the stairs there will certainly be rust there. A lot of buses have wooden floors, you will want to pull up the floor and inspect it, but you shouldn't be too worried about it if you have also have to repair the floor.
|
|
|
09-12-2007, 07:08 PM
|
#5
|
Skoolie
Join Date: Jul 2006
Location: Texas
Posts: 139
|
Re: How to inspect OLD bus before buying
I have a '58, '64 and recently bought a '63 (to span the gap parts wise). The major rust areas I've seen are either the firewall/back fender area (one was from IL) and the floor under water sources (rusted through). The rounded bottom edges of that one was rusted out in several areas. Enough so that I would ahvce to come up with something creative if I were going to make it open floor. I've no rust issues in the roof area. Even if it gets inside, I think it runs down and basically boils out with all of the heat. Be prepared for a lot of work if you really want to get it all straight. They're a lot of fun, but a lot of work. Huge PITA to move when they're not under their own power. (Actually scratch that somewhat, I just saw your pics. Shortie. Nice.)
I'm not sure what you're spending, but I've never paid more than $300 for one. I have yet to replace any axles or anything like that. None of them ran. One was in running condition, but I didn't buy the engine ($700 additional). It wasn't the engine I wanted, but then it took me a year to replace it so I probably should have just bought it anyway. I think you're working with a totally different budget than I ever have. That's fun. I've been wanting to pick up a modern diesel donor bus, but I haven't gotten that far. Be sure to keep posting up pics. Sounds like a cool project.
Here's a few pics of my first two. The '64 has just recently gotten officially road worthy: http://www.skoolie.net/gallery2/v/Skoolies/Vintage
|
|
|
09-12-2007, 09:39 PM
|
#6
|
Bus Geek
Join Date: Feb 2006
Location: Saint James, MN
Posts: 2,669
|
Re: How to inspect OLD bus before buying
1952 Wayne/Chevy/Cadillac 500ci resto rod
|
|
|
09-12-2007, 10:52 PM
|
#7
|
Skoolie
Join Date: Jul 2006
Location: Texas
Posts: 139
|
Re: How to inspect OLD bus before buying
Quote:
Originally Posted by jimmyaustintx
Hey davido did you get that 63 that was here in Austin....
|
Sorry, don't mean to hijack your thread.
Yes, thanks for the heads up. It has the front clip that I need to replace my rusted out '64. It also has a good enough body and rounded top front so that I can later use it to build as a "58" with that front clip. The chassis of my '58 and the current '64 front clip will likely see the scrap pile in the next year or so.
|
|
|
09-13-2007, 12:49 PM
|
#8
|
New Member
Join Date: Sep 2007
Posts: 4
Year: 1952
Coachwork: Wayne
Chassis: Chevrolet
Engine: 5.7 Proposed
Rated Cap: 12
|
Re: How to inspect OLD bus before buying
I am probably going to be upside down in this project from the start. I believe it is worth a little more because it is a factory shortie. Everyone that I have shown the pics to thinks its a shortened regular bus. I have found 1 unit like it, but have no info on it. Every other bus I have found that vintage twice as long and are missing lights, wipers, mirrors, - stuff specific to the Wayne body. This one has 99% of that stuff.
As far as my budget for the project, Its hard to say. I could estimate, triple the figure and still be short. For starters, I think I'll strip out the conversion have the body media blasted inside and out and spray it with Variprime, if for no other reason than to get the mice and mouse smell out. It won't fit in my shop, and Dad won't let it in his shop if its full of mice.
There is a restoration shop near Ashland Nebraska that seems to be reasonable with blasting costs.
I think most of you understand the multi-year project, and this will most certainly qualify.
|
|
|
02-11-2008, 09:22 PM
|
#9
|
Bus Crazy
Join Date: Nov 2007
Location: vancouver island bc
Posts: 1,028
Year: 1965
Coachwork: thomas
Chassis: chevy
Engine: 350
|
Re: How to inspect OLD bus before buying
barxracer did you buy this bus? how is it going? timbuk
|
|
|
08-18-2008, 06:04 PM
|
#10
|
Mini-Skoolie
Join Date: Aug 2008
Posts: 11
Year: 1966
Coachwork: supierior
Chassis: Chevy C60
Engine: Chevy 454
Rated Cap: 10
|
Re: How to inspect OLD bus before buying
Make sure the axels, hubs are good, hear in southern california they are hard to find, i had to go to tijuana to find mine. Also look into brake parts these are gunna cost a fortune, mine the wheel cylnders alone where 800 or more total, So you may want to just put newer axels under it in the first place. Hydrovac sucks, but BSC brake parts warehouse has rebuild kits for em just ask for rick
|
|
|
08-18-2008, 07:03 PM
|
#11
|
Bus Crazy
Join Date: Nov 2007
Location: vancouver island bc
Posts: 1,028
Year: 1965
Coachwork: thomas
Chassis: chevy
Engine: 350
|
Re: How to inspect OLD bus before buying
chevy c60.com
|
|
|
05-21-2011, 09:36 PM
|
#12
|
Bus Nut
Join Date: Feb 2010
Location: Huron, South Dakota
Posts: 422
Year: 1976
Coachwork: Wayne
Chassis: Dodge S-600
Engine: 360 V8
Rated Cap: 66
|
Re: How to inspect OLD bus before buying
I recently looked at a 1971 Carpenter/Dodge in western Iowa. Overall, the body was in excellent condition. I didn't buy it because I decided to wait and find a longer rig.
One thing, though, is that the underside had surface rust throughout. Looked pretty light, not crusty, no holes anywhere. Any thoughts on how to evaluate for what level of work needed to deal with this? Would "Ospho" be sufficient as long as the metal was solid? (As for the outer body, I'd want to strip the paint until I had a good substrate for my own paint job.)
The engine was recently rebuilt and the clutch plate replaced. The 4-speed stick worked great. I drove it on a farm road and it felt like it was smithed out of one hunk of steel.
Quote:
Originally Posted by barxracer
There is a restoration shop near Ashland Nebraska that seems to be reasonable with blasting costs.
|
Awesome! I live in nearby Omaha. I hope they're still in business by the time I eventually get a bus.
__________________
Any action for which there is no logical explanation will be deemed "company policy."- Akvol's Second Law of the Corporation
|
|
|
06-02-2011, 10:21 AM
|
#13
|
Bus Nut
Join Date: Feb 2010
Location: Huron, South Dakota
Posts: 422
Year: 1976
Coachwork: Wayne
Chassis: Dodge S-600
Engine: 360 V8
Rated Cap: 66
|
Re: How to inspect OLD bus before buying
Here is a photo of the undercarrage of a 2000 model year bus I just saw on eBay. The picture is from the listing. (The bus is in New York State.)
If memory serves me correctly, the 1971 bus I looked at last year was actually better. Any thoughts on how whether this can be dealt with? I still would rather fix up a classic, so info for future reference would be useful, since "rust-free oldie" is something of an oxymoron.
__________________
Any action for which there is no logical explanation will be deemed "company policy."- Akvol's Second Law of the Corporation
|
|
|
06-02-2011, 10:47 AM
|
#14
|
Bus Crazy
Join Date: Apr 2010
Posts: 1,485
|
Re: How to inspect OLD bus before buying
a light sandblasting and undercoating is all i can recommend...
|
|
|
06-30-2011, 05:56 PM
|
#15
|
Bus Nut
Join Date: Feb 2010
Location: Huron, South Dakota
Posts: 422
Year: 1976
Coachwork: Wayne
Chassis: Dodge S-600
Engine: 360 V8
Rated Cap: 66
|
Re: How to inspect OLD bus before buying
Quote:
Originally Posted by Skunky Bus
Here is a photo of the undercarrage of a 2000 model year bus I just saw on eBay. The picture is from the listing. (The bus is in New York State.)
If memory serves me correctly, the 1971 bus I looked at last year was actually better. Any thoughts on how whether this can be dealt with? I still would rather fix up a classic, so info for future reference would be useful, since "rust-free oldie" is something of an oxymoron.
|
Here's a 1966 bus I just saw in Iowa: Just an interesting example (combined with the Y2K bus pictured above) of age not predicting degree of rust. I think what's there would sandblast off well.
__________________
Any action for which there is no logical explanation will be deemed "company policy."- Akvol's Second Law of the Corporation
|
|
|
01-09-2012, 03:26 PM
|
#16
|
Bus Crazy
Join Date: Nov 2007
Location: vancouver island bc
Posts: 1,028
Year: 1965
Coachwork: thomas
Chassis: chevy
Engine: 350
|
Re: How to inspect OLD bus before buying
hey the older the bus the cooler it is,just look out for ROT AND mold
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Buying a bus
|
tesswynn92 |
Skoolie Conversion Projects |
10 |
08-13-2014 04:24 PM |
Buying first bus!
|
cschlessman |
Conversion General Discussions |
1 |
06-22-2012 04:35 AM |
After buying...
|
LOrOLR |
Conversion General Discussions |
4 |
09-08-2009 01:33 AM |
Buying a first bus
|
gmkdart |
Conversion General Discussions |
1 |
08-03-2008 03:00 PM |
Buying Bus
|
code4 |
Skoolie Conversion Projects |
18 |
10-23-2005 04:40 PM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|