Re: Toyhauler/camper project:
well I took my interior wiring harness out and washed the front of the bus firewall out reall good. It was FULL of dirt and dust, as was the rest of the bus but its all clean now. I want to add some insulation to the firewall area and decided to pull the harness to make it easier. I got to thinking about it and where the fuse block was buried meant a painful cramped time if I ever need to check a fuse so..... I took the wrap off the harness and found that all but 5 wires were long enough to allow me to separate my fuse block from the firewall connector by more than 24"! I lengthened the 5 wires, (Soldered, sealed and heatshrinked BTW) now my fuse block will be right at the edge of my new dash panel for easy access. I repaired some bad spots in the wiring and labeled all of it so I know in the future what goes where.