1994 bluebird turn signals not working

[Chadluc]

have a 1994 tc2000 with a cummins 5.9. blinkers worked fine on bus then they would kinda light up on dash sometimes blink then they stoped working altogether. Can't seem to find out how they work exactly. all other lights work fine.Would be nice to have turn signals agian any help please

[busdriver_phil]

My first guess would be a dead flasher. Check the chassis fuse panel, I believe on those it's a panel on the flat part of the dash (I could be wrong, it's been a while since I was in a TC). If not there, try the electrical panel under the driver's window (should be a lever near the floor under/behind the switch panel to unlatch it). The flasher would be a small square or round plug-in type, and can be replaced with one from any Napa or Wal-Mart type store. It's a cheap enough part, but a quick way to test is to remove the flasher and jump the terminals it plugs into, and see if the turn signals then come on steady without flashing. If they do, you've got a bad flasher, if not, you have a wiring issue somewhere else.

[keith]

Ha,,, i got the same bus and the flasher for them are in the outside compart under the drivers window,,it one of the ones on the bar ...i like that door on the front ,i have a tc2000 94 model with the lock at the bottom with little windows..


keith the. last rodeo


if you ever come across a wireing diagram for that yr bus let me know thanks

[Chadluc]

I haven't taken a look yet at the turn signal but I will. I have to wait until I am able to get to that panel as the bus is parked in a way which I do not have room to open it.I'll pull it out soon and take a look