Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Display Modes
 
Old 07-07-2019, 02:00 PM   #1
Mini-Skoolie
 
Bremill's Avatar
 
Join Date: Nov 2018
Location: Saskatoon, Canada
Posts: 26
Year: 2003
Engine: 7.3 Liter
Rated Cap: 30 passenger
Body filler in light holes

I've removed all the lights around the top. I closed most of the holes on the inside with fibreglass. One thing I haven't seen anyone do is close them on the outside with body filler. Is this a viable procedure? Seems simple and effective enough to me.

Bremill is offline   Reply With Quote
Old 07-07-2019, 02:15 PM   #2
Bus Crazy
 
HazMatt's Avatar
 
Join Date: Oct 2017
Location: E Central Tejas
Posts: 2,094
Year: 1998
Coachwork: Thomas
Chassis: IH 3800, 8 window
Engine: T444E w/ Spicer 5-speed MT
Rated Cap: I prefer broad-brims hats
By, "all the top lights," I hope that you mean the two pairs fore and aft, not the marker lights on the sides.
Here in the US, those side lights are required to be functional, at least they are here in Texas...
__________________
Those who say that it cannot be done should not interrupt the people doing it.
HazMatt is offline   Reply With Quote
Old 07-07-2019, 02:23 PM   #3
Mini-Skoolie
 
Bremill's Avatar
 
Join Date: Nov 2018
Location: Saskatoon, Canada
Posts: 26
Year: 2003
Engine: 7.3 Liter
Rated Cap: 30 passenger
Left the marker lights. Removed flashers and strobe on top.
Bremill is offline   Reply With Quote
Old 07-07-2019, 02:31 PM   #4
Bus Crazy
 
HazMatt's Avatar
 
Join Date: Oct 2017
Location: E Central Tejas
Posts: 2,094
Year: 1998
Coachwork: Thomas
Chassis: IH 3800, 8 window
Engine: T444E w/ Spicer 5-speed MT
Rated Cap: I prefer broad-brims hats
Cool beans! [emoji106]
Would have liked to have left the strobe, but it's incontrovertible incontinence was intolerable...
So I cut a considerably larger hole where it was to mount the A/C!
__________________
Those who say that it cannot be done should not interrupt the people doing it.
HazMatt is offline   Reply With Quote
Old 07-07-2019, 03:07 PM   #5
Bus Crazy
 
Join Date: Feb 2019
Location: New Hampshire
Posts: 1,349
Year: 1990
Coachwork: Thomas 4 window w/lift
Chassis: G30~Chevy cutaway
Engine: 5.7/350 Chevy Vortec
Rated Cap: Just me and my "stuff"?
If you can't weld those holes closed, Bondo/polyester body filler will work.
I, personally, would fill any holes bigger than 3" with a metal patch first then cover over w/Bondo/body filler...
peteg59 is offline   Reply With Quote
Old 07-07-2019, 03:11 PM   #6
Mini-Skoolie
 
Bremill's Avatar
 
Join Date: Nov 2018
Location: Saskatoon, Canada
Posts: 26
Year: 2003
Engine: 7.3 Liter
Rated Cap: 30 passenger
Thanks much
Bremill is offline   Reply With Quote
Old 07-07-2019, 03:19 PM   #7
Bus Crazy
 
HazMatt's Avatar
 
Join Date: Oct 2017
Location: E Central Tejas
Posts: 2,094
Year: 1998
Coachwork: Thomas
Chassis: IH 3800, 8 window
Engine: T444E w/ Spicer 5-speed MT
Rated Cap: I prefer broad-brims hats
Quote:
Originally Posted by peteg59 View Post
...
I, personally, would fill any holes bigger than 3" with a metal patch first then cover over w/Bondo/body filler...
^
Unless you're a fan of sloppy-droopy oversized holes.
__________________
Those who say that it cannot be done should not interrupt the people doing it.
HazMatt is offline   Reply With Quote
Old 07-07-2019, 03:24 PM   #8
Mini-Skoolie
 
Bremill's Avatar
 
Join Date: Nov 2018
Location: Saskatoon, Canada
Posts: 26
Year: 2003
Engine: 7.3 Liter
Rated Cap: 30 passenger
Nothing is bigger than an inch
Bremill is offline   Reply With Quote
Old 07-07-2019, 03:31 PM   #9
Bus Crazy
 
Join Date: Feb 2019
Location: New Hampshire
Posts: 1,349
Year: 1990
Coachwork: Thomas 4 window w/lift
Chassis: G30~Chevy cutaway
Engine: 5.7/350 Chevy Vortec
Rated Cap: Just me and my "stuff"?
Filler up!
Proper preparation of the metal surrounding the hole(s), is key to having good adhesion over the patched area.
peteg59 is offline   Reply With Quote
Old 07-07-2019, 03:40 PM   #10
Bus Crazy
 
HazMatt's Avatar
 
Join Date: Oct 2017
Location: E Central Tejas
Posts: 2,094
Year: 1998
Coachwork: Thomas
Chassis: IH 3800, 8 window
Engine: T444E w/ Spicer 5-speed MT
Rated Cap: I prefer broad-brims hats
Bare, clean metal is key for successful closure!
Tho I'd recommend NOT inserting the fuel pump's nozzle into said hole, unless you are particularly keen on the subtle bouquet of aliphatic compounds wafting about your living space...
__________________
Those who say that it cannot be done should not interrupt the people doing it.
HazMatt is offline   Reply With Quote
Old 07-07-2019, 05:49 PM   #11
Bus Geek
 
musigenesis's Avatar
 
Join Date: Jan 2019
Location: Philadelphia
Posts: 6,995
Year: 2003
Coachwork: International
Chassis: CE 300
Engine: DT466e
Rated Cap: 65C-43A
Quote:
Originally Posted by Bremill View Post
I've removed all the lights around the top. I closed most of the holes on the inside with fibreglass. One thing I haven't seen anyone do is close them on the outside with body filler. Is this a viable procedure? Seems simple and effective enough to me.
Use a Bondo self-adhesive patch over the hole and Bondo Glass fiberglass-reinforced filler (instead of the normal stuff). If your holes are 1" like you say, this should be sufficient to seal them over. The flashers on my bus had 5" openings which Bondo would probably not work very well for (my bus came with a few large Bondo repairs of rust holes a few inches in diameter and they are bubbly and nasty).

A more long-term fix would be sheet metal patches welded or riveted over the holes.
__________________
Rusty 87 build thread
musigenesis is offline   Reply With Quote
Old 07-07-2019, 10:03 PM   #12
Bus Nut
 
farok's Avatar
 
Join Date: Jan 2019
Posts: 375
Year: 2003
Chassis: Chevy cut-away 6-window shortie
Engine: 6.0L Gasser
On mine, the holes were 4-5" so I riveted sheet metal on the inside, and then used fiberglass to fill in the hole on the outside.

On the front, the whole front is fiberglass, so I cleaned up to the existing fiberglass, ran packing tape from the inside, and fiberglassed in to match what was there already.

Chris
__________________
My build thread: https://www.skoolie.net/forums/f27/fi...ild-25804.html
farok is offline   Reply With Quote
Old 07-07-2019, 10:18 PM   #13
Bus Geek
 
musigenesis's Avatar
 
Join Date: Jan 2019
Location: Philadelphia
Posts: 6,995
Year: 2003
Coachwork: International
Chassis: CE 300
Engine: DT466e
Rated Cap: 65C-43A
Quote:
Originally Posted by farok View Post
On mine, the holes were 4-5" so I riveted sheet metal on the inside, and then used fiberglass to fill in the hole on the outside.
Chris
Didn't this leave a bunch of rivets exposed on the outside? Or do you have a double skin of some sort?
__________________
Rusty 87 build thread
musigenesis is offline   Reply With Quote
Old 07-08-2019, 05:25 AM   #14
Bus Nut
 
farok's Avatar
 
Join Date: Jan 2019
Posts: 375
Year: 2003
Chassis: Chevy cut-away 6-window shortie
Engine: 6.0L Gasser
Quote:
Originally Posted by musigenesis View Post
Didn't this leave a bunch of rivets exposed on the outside? Or do you have a double skin of some sort?
Yes - 8 rivets. On the back I wasn't as concerned with looks. I suppose I could have JB-Welded the sheet on instead for a cleaner look, but the rear corner got bashed at one point in the bus' life, so I didn't care enough.

Chris
__________________
My build thread: https://www.skoolie.net/forums/f27/fi...ild-25804.html
farok is offline   Reply With Quote
Old 07-08-2019, 07:22 AM   #15
Bus Geek
 
musigenesis's Avatar
 
Join Date: Jan 2019
Location: Philadelphia
Posts: 6,995
Year: 2003
Coachwork: International
Chassis: CE 300
Engine: DT466e
Rated Cap: 65C-43A
I covered my flasher holes with these 7" diameter 1/8" steel disks that I got on eBay for $4 each:

Click image for larger version

Name:	IMG_0162.jpeg
Views:	15
Size:	62.0 KB
ID:	35390

After putting them up it occurred to me that since the 1/4" rivets I used were $0.50 each, it was doubling the cost of each patch.
__________________
Rusty 87 build thread
musigenesis is offline   Reply With Quote
Old 07-08-2019, 07:39 AM   #16
Bus Crazy
 
HazMatt's Avatar
 
Join Date: Oct 2017
Location: E Central Tejas
Posts: 2,094
Year: 1998
Coachwork: Thomas
Chassis: IH 3800, 8 window
Engine: T444E w/ Spicer 5-speed MT
Rated Cap: I prefer broad-brims hats
8 rivets is kinda over-kill...
Looks really good, tho! [emoji106]
__________________
Those who say that it cannot be done should not interrupt the people doing it.
HazMatt is offline   Reply With Quote
Old 07-08-2019, 07:44 AM   #17
Bus Geek
 
EastCoastCB's Avatar
 
Join Date: Sep 2014
Location: Eustis FLORIDA
Posts: 23,764
Year: 1999
Coachwork: Thomas
Chassis: Freighliner FS65
Engine: Cat 3126
Rated Cap: 15
Quote:
Originally Posted by musigenesis View Post
I covered my flasher holes with these 7" diameter 1/8" steel disks that I got on eBay for $4 each:

Attachment 35390

After putting them up it occurred to me that since the 1/4" rivets I used were $0.50 each, it was doubling the cost of each patch.
Looks real nice!
EastCoastCB is offline   Reply With Quote
Old 07-08-2019, 09:39 AM   #18
Bus Geek
 
musigenesis's Avatar
 
Join Date: Jan 2019
Location: Philadelphia
Posts: 6,995
Year: 2003
Coachwork: International
Chassis: CE 300
Engine: DT466e
Rated Cap: 65C-43A
Quote:
Originally Posted by HazMatt View Post
8 rivets is kinda over-kill...
Looks really good, tho! [emoji106]
Thanks. I talked myself out of doing 12, actually. The problem was that I mangled the hell out of those openings getting the flashers off because the attaching screws were rusted tight, and they were already kind of bent up from a past-life dent in the rear. I wanted a thick piece of metal and many rivets to ensure a tight seal.

It made me kinda sad to paint these - I really liked the steampunk look with the black metal and shiny rivets.
__________________
Rusty 87 build thread
musigenesis is offline   Reply With Quote
Old 07-08-2019, 09:58 AM   #19
Bus Crazy
 
HazMatt's Avatar
 
Join Date: Oct 2017
Location: E Central Tejas
Posts: 2,094
Year: 1998
Coachwork: Thomas
Chassis: IH 3800, 8 window
Engine: T444E w/ Spicer 5-speed MT
Rated Cap: I prefer broad-brims hats
Too true, that's a cool look.
What about coming back to it with an artist's paint brush & silver paint?
__________________
Those who say that it cannot be done should not interrupt the people doing it.
HazMatt is offline   Reply With Quote
Old 07-08-2019, 10:14 AM   #20
Bus Geek
 
musigenesis's Avatar
 
Join Date: Jan 2019
Location: Philadelphia
Posts: 6,995
Year: 2003
Coachwork: International
Chassis: CE 300
Engine: DT466e
Rated Cap: 65C-43A
Quote:
Originally Posted by HazMatt View Post
Too true, that's a cool look.
What about coming back to it with an artist's paint brush & silver paint?
I'm thinking about it, but I know that if I give in to the temptation there, I'll probably end up hand-painting each rivet and screw on the outside of my bus. Which seems excessive.
__________________
Rusty 87 build thread
musigenesis is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 07:37 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.