|
10-22-2015, 09:10 AM
|
#1
|
Mini-Skoolie
Join Date: Oct 2015
Posts: 35
|
Bunk ergonomics (width, length, headroom, etc...)?
I'd love to hear from folks who have done bunks like these in their Skoolies:
School Bus Converted into Luxury RV: Day 33 - Bunks Done!
How wide/long are yours? If you have bunks on both sides, how much aisle clearance is there? How much headroom does each bunk have? Also, if you could post your inside dimensions that would be great. I am looking to build a larger shortie like this one:
The idea would be to locate the bunks longways, starting at the rear. I did a little research and found that 28 x 75 is a common RV mattress size, and I think that while it would be tight, it would be acceptable for an RV mattress. My wife and I are both 5'-10" and our girls are under five right now, so unless one or both of them gets to be extremely tall in their teenage years, I think we would be OK. 28" wide bunks would give me nearly 36" of aisle space between them given the inside width of the Collins body (91").
For those who think this is way too tight, please keep in mind that my goal here is a stripped down RV to use as a "home base" for weekend surf fishing trips and camping. Of course, for those who have done something similar with their bus who STILL think that it's way too tight, I'd like to hear that too. Finally (because I know someone will ask), I'm sticking with an E450 based bus rather than a fullsize because converting to 4WD is a must, as is maneuverability, so the added length and complexity/expense of a 4WD conversion rules a full size bus out for me.
Here's a very rough floorplan showing the concept:
There's no kitchen, table, or common area inside the bus because we just don't need it. Right now we camp out of an SUV and cook/eat outside. I plan to build a large retractable awning for the bus as well so that we don't have to haul around a canopy like we do now. The bus will simply be a place to crash/wash up at the end of a long day of fishing, hiking, hunting, etc... However, I do need the ability to safely carry my passengers (not in the RV compartment), hence the Club Wagon Seats. The new Transit vans have really nice 3 person benches where each passenger really has their own bucket with captain's chair style armrests, but they're very pricey. Maybe if I can snag one cheap...
|
|
|
10-22-2015, 11:01 AM
|
#2
|
Bus Crazy
Join Date: May 2010
Location: Montana
Posts: 1,626
Year: 1995
Coachwork: Blue Bird
Chassis: All-American R/E
Engine: 8.3 Cummins
Rated Cap: 72
|
I dont have time to go measure but here's a couple build pix. With 2 bunks you'll have more room than a condo setup in an entertainer.
|
|
|
10-22-2015, 11:06 AM
|
#3
|
Mini-Skoolie
Join Date: Oct 2015
Posts: 35
|
Quote:
Originally Posted by opus
I dont have time to go measure but here's a couple build pix. With 2 bunks you'll have more room than a condo setup in an entertainer.
|
Nice setup-thanks for posting. If you do have time later I'd love to know your interior width, etc... The bodies on the Collins E-450 based buses seem to be pretty close to those of full size buses, but every inch counts!
|
|
|
10-22-2015, 05:04 PM
|
#4
|
Bus Crazy
Join Date: May 2010
Location: Montana
Posts: 1,626
Year: 1995
Coachwork: Blue Bird
Chassis: All-American R/E
Engine: 8.3 Cummins
Rated Cap: 72
|
Bus is 90 wide. Bunks are 80 long, 33 wide and each one is about 28 tall. Aisle width would be 24.
I went with that bunk size for a reason but the reason now eludes me. [sigh]
I used the foam from 4 seat cushions for each bunk. I also put a 2" foam topper on them. Works fine for us.
|
|
|
10-22-2015, 09:03 PM
|
#5
|
Bus Geek
Join Date: Nov 2011
Location: MNT CITY TN
Posts: 5,158
|
def. look at standard sizes, the first night you sleep on your side and your hip is sore from the lack of pad or your knees/feet etc dont fit...you won't want to use it again
we sleep in a king at home i have my side, she her's and animals/neutral zone in middle
in the bus we each have a twin mattress, makes inbetween tight...we sleep there tho, it's cool, you may need to look at folding bunks to get sleeping width v/s not sleeping space
could be simple hinges and chain
__________________
Our build La Tortuga
Accept the challenges so that you can feel the exhilaration of victory.
George S. Patton
|
|
|
10-22-2015, 09:09 PM
|
#6
|
Bus Crazy
Join Date: May 2010
Location: Montana
Posts: 1,626
Year: 1995
Coachwork: Blue Bird
Chassis: All-American R/E
Engine: 8.3 Cummins
Rated Cap: 72
|
Quote:
Originally Posted by bansil
could be simple hinges and chain
|
Hey, hey, hey...this is a family show now, quit it!
|
|
|
10-23-2015, 07:27 AM
|
#7
|
Mini-Skoolie
Join Date: Oct 2015
Posts: 35
|
Quote:
Originally Posted by bansil
def. look at standard sizes, the first night you sleep on your side and your hip is sore from the lack of pad or your knees/feet etc dont fit...you won't want to use it again.
|
I'm going to try to mock something up and get a feel for what it would be like to sleep on. The mattress will definitely be important, but there seem to be a lot of high quality foam options out there. My sizing seems similar to opus, which is encouraging-hopefully others will chime in as well.
|
|
|
10-23-2015, 07:59 AM
|
#8
|
Bus Crazy
Join Date: Nov 2010
Location: Andrews,Indiana
Posts: 2,436
Year: 1991
Coachwork: Bluebird
Chassis: AARE
Engine: 3116 Cat 250hp
Rated Cap: Just the two of us.
|
Our bunks are in an L configuration, and are half queen each. 30x80. Unconventional, but makes for a lot more room in the not laying down area. I lived in a truck sleeper for 20 years, so I really try for large open spaces in each room of the bus.I can pretty much sleep on any surface so I just have a feather ticking pad. She has the cushions out of an RV for now. That size needs to have a custom mattress made, I'll get to it someday.
|
|
|
10-23-2015, 02:28 PM
|
#9
|
Bus Nut
Join Date: Aug 2015
Posts: 308
|
|
|
|
10-23-2015, 04:29 PM
|
#10
|
Bus Nut
Join Date: Jul 2014
Posts: 722
Year: 1998
Coachwork: Bluebird
Chassis: TC2000 RE
Engine: 8.3l Cummins
Rated Cap: 78
|
I built stowing bunks (double decker murphy beds?) that holds a standard size twin mattresses.
Personally, I wouldn't want to go any smaller than that.
|
|
|
10-23-2015, 04:58 PM
|
#11
|
Bus Geek
Join Date: Nov 2011
Location: MNT CITY TN
Posts: 5,158
|
Quote:
Originally Posted by aaronsb
I built stowing bunks (double decker murphy beds?) that holds a standard size twin mattresses.
Personally, I wouldn't want to go any smaller than that.
|
Aaron, you look less yellow in person, must be the lighting
By the way what does square kittah-corn eat
__________________
Our build La Tortuga
Accept the challenges so that you can feel the exhilaration of victory.
George S. Patton
|
|
|
10-23-2015, 06:07 PM
|
#12
|
Bus Crazy
Join Date: Apr 2014
Location: EHT New Jersey
Posts: 1,134
Year: 2003
Coachwork: AmTran
Chassis: International 3000RE
Engine: T444E/AT545
Rated Cap: 75
|
Quote:
Originally Posted by aaronsb
|
Nice use of Legos*™ for your blueprints, Aaron
|
|
|
10-23-2015, 06:23 PM
|
#13
|
Skoolie
Join Date: Jul 2015
Location: Farmington, IL
Posts: 187
Year: 1990
Coachwork: Blue Bird
Chassis: AARE 3903
Engine: Cummins 6CTA 8.3
Rated Cap: 84
|
Quote:
Originally Posted by aaronsb
I built stowing bunks (double decker murphy beds?) that holds a standard size twin mattresses.
Personally, I wouldn't want to go any smaller than that.
|
Did you plan your double decker using markers, constuction paper, and some glitter glue?!
|
|
|
10-23-2015, 07:51 PM
|
#14
|
Mini-Skoolie
Join Date: Oct 2015
Posts: 35
|
Quote:
Originally Posted by aaronsb
I built stowing bunks (double decker murphy beds?) that holds a standard size twin mattresses.
|
I never thought about foldaway beds-it would definitely add versatility to the space. Back to the drawing board...
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|