labeling is a good thing
from my build thread
so here she is bare
the neutrals and grounds where easy
next needed to know which hot went were so I could "load" the 50 amp side
I salvaged the rear door buzzer
,a fuse,couple alligator clips and a "power source, 12 transformer"
I made a quick circuit checker, hot goes thru fuse to wire at plug (i used an old plug with pig tail just to plug into sockets)
then when you touch the (-) of the power source it will buzz alarm....easy peezee
it's wired so if I have 50 amp I have 2 sockets on a seperate "leg" front ac or heater"
I "roughed in" another panel and it will be stored away in the bus...just incase...still very weird
I also decided to do this:
just incase....dunno...just incase