Reply
 
Thread Tools Display Modes
 
Old 01-27-2018, 07:32 PM   #1111
Bus Geek
 
Join Date: May 2009
Location: Columbus Ohio
Posts: 9,101
Year: 1991
Coachwork: Carpenter
Chassis: International S3800
Engine: DT360
Rated Cap: 7 Row Handicap
imguessing for the bus body that spray foam makes the bus very quiet from an outside noise perspective.. for the driver's cab. Dynamat , hushmat , etc are great rays to help reduce noise..

-Christopher
cadillackid is offline   Reply With Quote
Old 01-27-2018, 07:40 PM   #1112
Bus Nut
 
Jdawgsfanasty's Avatar
 
Join Date: Dec 2017
Posts: 971
Quote:
Originally Posted by cadillackid View Post
imguessing for the bus body that spray foam makes the bus very quiet from an outside noise perspective.. for the driver's cab. Dynamat , hushmat , etc are great rays to help reduce noise..

-Christopher
Automotive carpet?

Sent from my VS500PP using Tapatalk
Jdawgsfanasty is offline   Reply With Quote
Old 01-27-2018, 07:42 PM   #1113
Bus Geek
 
Join Date: May 2009
Location: Columbus Ohio
Posts: 9,101
Year: 1991
Coachwork: Carpenter
Chassis: International S3800
Engine: DT360
Rated Cap: 7 Row Handicap
Quote:
Originally Posted by Jdawgsfanasty View Post
Automotive carpet?

Sent from my VS500PP using Tapatalk
automotive carpet over the top of Hushmat or dynamat works good.. esp if you use the good stuff.. I always matted the tub of hotrod projects. and then carpeted over.
-Christopher
cadillackid is offline   Reply With Quote
Old 01-27-2018, 07:58 PM   #1114
Bus Geek
 
Robin97396's Avatar
 
Join Date: Feb 2016
Location: Willamina, Oregon
Posts: 6,409
Coachwork: 97 Bluebird TC1000 5.9
You're absolutely right about how much noise the sprayfoam stops. It's night and day. I could easily hear people talking outside previously and pounding on the side of the bus was like beating a drum. Now pounding on the side of the bus is like hitting a wood beam with your hand.

I do think the bedliner would also seal and deaden the noise quite effectively. I wouldn't put the rubber coating on the exterior roof because it's to soft, but I have considered using bedliner on the roof if it had problems with leaking. I used seam sealer before painting and I didn't have any leaks to begin with. Personally I like the painted metal finish on the roof because it is relatively easy to clean compared to a bedliner surface.
__________________
Robin
Nobody's Business
Robin97396 is offline   Reply With Quote
Old 01-27-2018, 08:50 PM   #1115
Skoolie
 
Join Date: Jan 2018
Posts: 111
CARPET is a bad word in our household. 5 dogs 2 cats and a slob that occasionally slops his coffee on the floor(Hint: not my wife) Every surface has to be easy to clean. Planning some sort of padded vinyl flooring on top of rigid foam insulation.

We donít operate a mobile zoo, if we have ALL of them on the bus at the same time there may be zombies coming or something, but we have no shortage of volunteers when itís time to go for a ride.
RRRVBUS is offline   Reply With Quote
Old 01-28-2018, 02:04 AM   #1116
Bus Nut
 
Join Date: Jun 2013
Location: Picton,Ont, Can.
Posts: 787
Year: 1997
Coachwork: Bluebird
Chassis: GMC
Engine: Cat 3116
Rated Cap: 72
Quote:
Originally Posted by EastCoastCB View Post
We'll be working on nice smooth concrete.

I guess I need to measure it and see if it will work.
CB, that thing gives you to clear 8'5" max at the bottom of the hook.
That makes it really tight to pull the rsd with that if ever.
You need more height too account for rigging slings or chains, in addition to the hydraulic lift cylinder.
And if with CAC pipes on the rad, hoses etc, it will not be a straight up pull.
It will twist, likely flop backwards.
Centre of gravity changes and therefore you have to be able to go higher. If you try that lift and it suddenly drops, you loose fingers if not expecting a change while lifting and you could damage the fins of the rad bad. Please don't do that.
Two tons is enough though, just get a higher lift point.
No matter the surface you work on, the bigger the caster, the better it will roll out of the way and drop onto the ground, trailer, just hang, or whatever.
You do want it to go in as easy as it came out too or easier, so maneuverability is huge.
Height and mobility is everything.

Not sure what that will weigh..guessing about 1200 max, if empty.

Size slings for that or greater. Hope they aren't frayed in any way also. That's when oops happens, when you least expect it.

John

Build your own hoist with what you got around or find stuff to make one cheap.
There are simple ideas that will lift that out of there for you, you should build something with the stuff you have around or can scrounge easy.

John
__________________
Question everything!
BlackJohn is online now   Reply With Quote
Old 01-28-2018, 09:01 AM   #1117
Bus Geek
 
Join Date: May 2009
Location: Columbus Ohio
Posts: 9,101
Year: 1991
Coachwork: Carpenter
Chassis: International S3800
Engine: DT360
Rated Cap: 7 Row Handicap
on my bus the radiator was about 50 lbs or so.. and the CAC about the same.. the core support id estimate at maybe 150? so id say since he has full rad and full CAC that he would have 500 MAX and thats beiing conservative..

it doesnt have to go up that high.. the bonnet comes off with 2 large pins and the 4 spring cable pins and unplug the wire harnesses.. 2 people can lift that bonnet easily and set it down.. now you just have to clear the bumper..

you can unbolt the fan shroud from the system or leave it on but it gets a bit tricky with the fan in there still doable though.. radiator hoses come off easy.. turbo pipes on mine ccame apart easy.

since you dont have the split radiator you may be able to disassemble each component... that weas the mistake i made wit hthe split radiator which made getting it back together real tough.. getting to the bolts was tough as it was obviously dropped in as a unit when my bus was built.. ive seen some vids of people doing front engione work and they pull the system out as a unit with a regular engine hoist or a bobcat.
-Christopher
cadillackid is offline   Reply With Quote
Old 01-28-2018, 10:09 AM   #1118
Bus Nut
 
Defjr333's Avatar
 
Join Date: Aug 2017
Location: Culpeper, Virginia
Posts: 279
Chassis: Shuttle or Shorty. Still hunting
Engine: Prefer Diesel
Rated Cap: 14 to 24 pref
If pple 3000 years ago can build pyramids, I think you can find a way
Doug
Attached Images
File Type: gif giphy.gif (967.3 KB, 5 views)
Defjr333 is offline   Reply With Quote
Old 01-28-2018, 11:33 AM   #1119
Bus Crazy
 
Join Date: May 2016
Location: Georgia
Posts: 1,040
Year: 2001
Coachwork: Blue Bird
Chassis: IH
Engine: T444E
Rated Cap: 14
Earlier a gear swap was mentioned. I have a 5.29 ratio in my bus which is soon to be swapped (I don't have overdrive). Any takers? Axle is an N175 I believe.
Brad_SwiftFur is offline   Reply With Quote
Old 01-28-2018, 01:16 PM   #1120
Bus Nut
 
Jolly Roger bus 223's Avatar
 
Join Date: Sep 2017
Location: Swansboro,NC
Posts: 530
Year: 86
Coachwork: Thomas
Chassis: Ford B700
Engine: 8.2
Rated Cap: 60 bodies
Quote:
Originally Posted by Brad_SwiftFur View Post
Earlier a gear swap was mentioned. I have a 5.29 ratio in my bus which is soon to be swapped (I don't have overdrive). Any takers? Axle is an N175 I believe.
Is the rated cap in your signature the actual vehicle cap or is it how many you can carry now?
Interested if it will work for me but your cap. Is low for me?
Thanks.
Jolly Roger bus 223 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:37 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.