Re: Bus is Dead after Removal of Stop Arm
Like it was posted earlier.. you either have to have a schematic.. or check each wire.. In the thomas that i now have, as i disconnected things like the back door wiring, and stop arm, buzzers, wiring.. i checked each wire, because some of them are hot, and some wires have to go to the ground in order for the bus to start. So if I were doing it, i would unhook and check for starting... My bus also has a schematic for the control panel, so if yours has one you might check it as you go along. hope this helps...
__________________
Jesus Christ... Conversion in progress.
|