Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Closed Thread
 
Thread Tools Display Modes
 
Old 02-26-2019, 09:06 AM   #1
Mini-Skoolie
 
Join Date: Jul 2018
Posts: 33
Solar cable gauge help!

Hey all,

My girlfriend and I are putting together a 12v 600 watt solar array up on the ol skoolie (insta @bedbusandbeyond) roof but I’m having trouble figuring out what gauge cables to use. I’ve taken a look at a few charts but they’ve seemingly given me contradictory info on voltage drops.

So! Without further ado, here is the fun technical plan: I was thinking of running 3 panels in series and then connecting them in parallel to another 3 panels in series. I think this would result in optimum operatint voltage of 17.8x3= 53.4V and an optimum operating current of 5.62x2= 11.24A. I suppose I could do 3 sets of 2 if necessary.

Right now I have a 20 ft/10 gauge cord to connect my 40 amp charge controller to the panels. I also have a 8 ft/ 10 gauge for the tray cable. Are these wire gauges too small? If I need to get new ones what should I get? I could probably get away with a 10 ft wire instead of a 20 ft.

Thanks!
Attached Thumbnails
E300E62F-1C89-47BE-BC5A-A1D3E67C8652.jpg  

neuronmisfires is offline  
Old 02-26-2019, 09:32 AM   #2
Bus Geek
 
Join Date: May 2016
Location: Eastern WA
Posts: 6,401
Year: 2002
Coachwork: Bluebird
Chassis: All American RE (A3RE)
Engine: Cummins ISC (8.3)
Rated Cap: 72
https://www.renogy.com/calculators#tab_solar-cable

Looks like 10 gauge for a 20' run carrying 11.24 amps will keep your voltage drop under 2%.

For the install you lined out 10 gauge will be fine.
PNW_Steve is offline  
Old 02-27-2019, 12:54 AM   #3
Bus Geek
 
Join Date: Sep 2015
Posts: 3,856
Year: 2002
Coachwork: Thomas Built Bus
Chassis: Freightliner FS65
Engine: Caterpillar 3126E Diesel
Rated Cap: 71 Passenger- 30,000 lbs.
Reminder, the shorter the run (which is the total to the battery and back) the lower the resistance (and voltage drop) in the cabeles themself. So, unless you expect to have to move the panels and will need the extra length, cut off the excess and run only that which you need to make the run plus just a little slack.
Native is offline  
Old 02-27-2019, 05:38 AM   #4
Bus Crazy
 
Ronnie's Avatar
 
Join Date: Oct 2017
Location: Virginia
Posts: 2,324
Year: 1971
Coachwork: Wayne
Chassis: International Loadstar 1700
Engine: 345 international V-8
10 gauge wire is normally considered to be good for 30 amps. I used 8 gauge because I had it and if I want to add more panels the wiring will support it.

The renogy connecters work with 10 gauge wire.
Ronnie is offline  
Old 02-27-2019, 09:28 AM   #5
Mini-Skoolie
 
Join Date: Jul 2018
Posts: 33
Ah perfect! The windy nation chart scared me, but I guess it didn’t account for my series and parallel connections. Thanks guys! Now I don’t have to buy new wire
neuronmisfires is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:35 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.