|
03-28-2016, 08:55 PM
|
#1
|
New Member
Join Date: Jan 2016
Location: Central Texas
Posts: 6
Year: 1996
Coachwork: BlueBird
Chassis: Series B,I think!
Engine: 366 Towanda
Rated Cap: 14 People
|
Air and Heat
Hello,
The air is out,the compressor is bad,the freon is all leaked out,the heater hose's leak,the cutoff valve by the drivers seat is leaking also,its just in bad shape.I'm going to pull it all out.Other than capping off the hose's on the radiator and engine and pulling the hose's out,do i need to replace the compressor with a pulley?Will the compressor eventually lock up?
Ernie
|
|
|
03-28-2016, 09:03 PM
|
#2
|
New Member
Join Date: Jan 2016
Location: Central Texas
Posts: 6
Year: 1996
Coachwork: BlueBird
Chassis: Series B,I think!
Engine: 366 Towanda
Rated Cap: 14 People
|
|
|
|
03-28-2016, 10:15 PM
|
#3
|
Bus Crazy
Join Date: May 2010
Location: Montana
Posts: 1,626
Year: 1995
Coachwork: Blue Bird
Chassis: All-American R/E
Engine: 8.3 Cummins
Rated Cap: 72
|
Boy, road air in a bus. I myself would spend whatever to make it work.
|
|
|
03-28-2016, 10:24 PM
|
#4
|
Bus Geek
Join Date: Mar 2011
Location: Houston, Texas
Posts: 8,462
Year: 1946
Coachwork: Chevrolet/Wayne
Chassis: 1- 1/2 ton
Engine: Cummins 4BT
Rated Cap: 15
|
Check out the systems in Fire, rescue and EMT vehicles. According to a fireman friend here, besides the standard engine driven compressor units, many run 110 volt units off of massive alternators and a big a$$ inverter.
|
|
|
03-29-2016, 09:26 AM
|
#5
|
Bus Nut
Join Date: Jul 2014
Posts: 722
Year: 1998
Coachwork: Bluebird
Chassis: TC2000 RE
Engine: 8.3l Cummins
Rated Cap: 78
|
The compressor has a clutch and just freewheels when its not engaged.
Having said that, I'd really think about repairing the system first. Engine driven air would be really nice.
Quote:
Originally Posted by BigErn
Hello,
The air is out,the compressor is bad,the freon is all leaked out,the heater hose's leak,the cutoff valve by the drivers seat is leaking also,its just in bad shape.I'm going to pull it all out.Other than capping off the hose's on the radiator and engine and pulling the hose's out,do i need to replace the compressor with a pulley?Will the compressor eventually lock up?
Ernie
|
|
|
|
03-29-2016, 10:39 AM
|
#6
|
Bus Geek
Join Date: May 2009
Location: Columbus Ohio
Posts: 18,830
Year: 1991
Coachwork: Carpenter
Chassis: International 3800
Engine: DTA360 / MT643
Rated Cap: 7 Row Handicap
|
is the compressor guts locked? howd you test for bad compressor? heck I'd love to have that system if you are ripping it out!! that is if you take it out carefully.. freon leaking out isnt always a bad compressor... its usually bad O-rings and can be fixed, then you convert to R-134A.. if the compressor just isnt kicking on its likely because the freon leaked out.. it hinders it from coming on..
you could likely convert that to Sanden if it isnt already.. and even if its tecumseh (like my bird was) you can replace the compressor...
occasioanlly a rock gets in the skirt mounted condensor... but yes I would gladly drive from ohio to texas to take the components off oyur hands!!..
otherwise id tell you to fix it up and make it run..
-Christopher
|
|
|
03-29-2016, 11:10 AM
|
#7
|
Bus Crazy
Join Date: Nov 2010
Location: Andrews,Indiana
Posts: 2,436
Year: 1991
Coachwork: Bluebird
Chassis: AARE
Engine: 3116 Cat 250hp
Rated Cap: Just the two of us.
|
Christopher,
If you want to drive to Indiana, you can have all the stuff I took out except for the condenser fans. Two of everything, worked when I took them off. No guarantee of anything.
|
|
|
03-29-2016, 12:15 PM
|
#8
|
Bus Geek
Join Date: May 2009
Location: Columbus Ohio
Posts: 18,830
Year: 1991
Coachwork: Carpenter
Chassis: International 3800
Engine: DTA360 / MT643
Rated Cap: 7 Row Handicap
|
also FYI those hurri-hot defrosters were some of the best for their time... in my last unit, I custom built dash-air into those... there was plenty of room to work...
gave me the advantage I simply spun those vents around in summer and blew all 3 on me and it was nice N cool... in winter I spun them back around for heat and had defogged-defrost just like a car has...
I doubt the coils in those are leaking as they held up pretty well.. that valve is strraight forward to replace if you take out the seat that box comes part pretty well... hoses are hoses.. you'll need heat for driving somehow and the front heaters in the bus are great..
the rears are usually taken out just because they were put in the worst places for a conversion...
im hoping my carpenter will have the same nice system those blue-birds had..
-Christopher
|
|
|
03-29-2016, 12:25 PM
|
#9
|
Bus Geek
Join Date: May 2009
Location: Columbus Ohio
Posts: 18,830
Year: 1991
Coachwork: Carpenter
Chassis: International 3800
Engine: DTA360 / MT643
Rated Cap: 7 Row Handicap
|
Quote:
Originally Posted by somewhereinusa
Christopher,
If you want to drive to Indiana, you can have all the stuff I took out except for the condenser fans. Two of everything, worked when I took them off. No guarantee of anything.
|
thanks for the offer!! unfortunaterly yours are bluebird side mount specific.. I need a rear ceiling mount similar to the OP.. at least for engine powered..
Love your build!! the industrial look and esp the use of mini-splits for your A/C..
I fashioned 3 of those completely custom as part of a hybrid heat / cool in my house.. they are ducted and zoned through my existing home floor ducting... ..
only thing I can say is you may want to think about flexible pipe adapters between the unit and the pipes that go into your bus.. these units are Notorious for leaks at the flare connections..
they are also picky about their R410A charge so if you shortened or lengthened the piping.. (15 feet is used as reference)... you should adjust the charge accordingly..
Ive got a whole lab with these units in my basement.. LOL.. HVAC design is my second passion..
the beauty of those too is that they are soft start.. so no hard surges on your generator!
-Christopher
|
|
|
03-29-2016, 03:54 PM
|
#10
|
Bus Nut
Join Date: Feb 2014
Location: The Valley - Arizona
Posts: 644
Year: 1999
Coachwork: Thomas
Chassis: Freight-shaker (Freightliner)
Engine: Cat 3126b 250 HP
Rated Cap: Only 1 seat
|
Call Trans arctic. 877-265-3247, they do commercial bus ac systems. I actually have them looking for a system for my 99 mvp. The lady in the parts department is super cool!
-Doc
|
|
|
03-29-2016, 04:29 PM
|
#11
|
Bus Geek
Join Date: May 2009
Location: Columbus Ohio
Posts: 18,830
Year: 1991
Coachwork: Carpenter
Chassis: International 3800
Engine: DTA360 / MT643
Rated Cap: 7 Row Handicap
|
Quote:
Originally Posted by Docsgsxr
Call Trans arctic. 877-265-3247, they do commercial bus ac systems. I actually have them looking for a system for my 99 mvp. The lady in the parts department is super cool!
-Doc
|
i'll be interested in what they come up with for you.. as ive noted. im working to put together an A/C system as well..
-Christopher
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|