Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Display Modes
 
Old 03-27-2007, 09:15 PM   #1
Moderator
 
crazycal's Avatar
 
Join Date: Feb 2007
Location: NUNYA
Posts: 4,236
Year: 1995
Coachwork: Thomas
Chassis: 3800
Engine: DT408, AT545
Rated Cap: 23 500 gvw
Shifter question.

My shifter will only go down to 3rd gear. I can't get it into 2nd. Do you think they blocked it? It was pretty scary going down the steep side of the Grapevine. The truck speed limit is 35 mph. I would slow down to 25 every time I got to 30mph, but I had to use my brakes over and over. There are two run away truck ramps on that grade. Before I take the shifter apart, is anybody else's shifter the same way?

__________________
I'm hungry!

You Gotta Let Me Fly
crazycal is offline   Reply With Quote
Old 03-27-2007, 11:02 PM   #2
Bus Geek
 
Elliot Naess's Avatar
 
Join Date: Oct 2005
Location: Clearlake, Northern California
Posts: 2,505
Year: 1992
Coachwork: Blue Bird
Chassis: TC-2000 Frt Eng, Tranny:MT643
Engine: 5,9 Cummins
Rated Cap: 84
Oooo.. I drive that grade all the time. Good sport!

Do you have a cable shifter or the infamous pneumatic push button arrangement?
The local district here has had trouble with the pneumatics and has replaced
some of those with a cable.
__________________

Elliot Naess is offline   Reply With Quote
Old 03-27-2007, 11:16 PM   #3
Moderator
 
crazycal's Avatar
 
Join Date: Feb 2007
Location: NUNYA
Posts: 4,236
Year: 1995
Coachwork: Thomas
Chassis: 3800
Engine: DT408, AT545
Rated Cap: 23 500 gvw
I think mine is a cable shifter. I guess I will have to check.
__________________
I'm hungry!

You Gotta Let Me Fly
crazycal is offline   Reply With Quote
Old 03-27-2007, 11:37 PM   #4
Bus Geek
 
Elliot Naess's Avatar
 
Join Date: Oct 2005
Location: Clearlake, Northern California
Posts: 2,505
Year: 1992
Coachwork: Blue Bird
Chassis: TC-2000 Frt Eng, Tranny:MT643
Engine: 5,9 Cummins
Rated Cap: 84
You'd know. The pneumatic system has push buttons like a 1961 Rambler.
__________________

Elliot Naess is offline   Reply With Quote
Old 03-27-2007, 11:40 PM   #5
Moderator
 
crazycal's Avatar
 
Join Date: Feb 2007
Location: NUNYA
Posts: 4,236
Year: 1995
Coachwork: Thomas
Chassis: 3800
Engine: DT408, AT545
Rated Cap: 23 500 gvw
I have a lever with a round knob and a button on top.
__________________
I'm hungry!

You Gotta Let Me Fly
crazycal is offline   Reply With Quote
Old 03-27-2007, 11:46 PM   #6
Bus Geek
 
Elliot Naess's Avatar
 
Join Date: Oct 2005
Location: Clearlake, Northern California
Posts: 2,505
Year: 1992
Coachwork: Blue Bird
Chassis: TC-2000 Frt Eng, Tranny:MT643
Engine: 5,9 Cummins
Rated Cap: 84
Very good. I suppose it could have been blocked to keep the district drivers from
overreving the engine.
__________________

Elliot Naess is offline   Reply With Quote
Old 03-28-2007, 12:05 AM   #7
Moderator
 
crazycal's Avatar
 
Join Date: Feb 2007
Location: NUNYA
Posts: 4,236
Year: 1995
Coachwork: Thomas
Chassis: 3800
Engine: DT408, AT545
Rated Cap: 23 500 gvw
Maybe they don't have anything like the Grapevine in Scottsdale, AZ. I guess I will be taking it apart after I get other safety stuff done first. Was that you that got a build sheet from A-Z bus Sales for your bus. If it was you, what did you have to do to get it?
__________________
I'm hungry!

You Gotta Let Me Fly
crazycal is offline   Reply With Quote
Old 03-28-2007, 12:16 AM   #8
Bus Geek
 
Elliot Naess's Avatar
 
Join Date: Oct 2005
Location: Clearlake, Northern California
Posts: 2,505
Year: 1992
Coachwork: Blue Bird
Chassis: TC-2000 Frt Eng, Tranny:MT643
Engine: 5,9 Cummins
Rated Cap: 84
Yes, that was me. I just walked in and introduced myself. I offered to pay a few bucks,
like I did at IH, but she just printed it out and gave it to me.
I have found over the years, that if I offer right up front to pay a fair price for
something, then they tend to take me as a sincere future customer, and not
a bum looking for freebies.
One problem: The printout is not complete. The printer cut off the right edge, and she
couldn't get it to print properly. But I still got lots of info.

Where do you live, Cal?
__________________

Elliot Naess is offline   Reply With Quote
Old 03-28-2007, 12:19 AM   #9
Moderator
 
crazycal's Avatar
 
Join Date: Feb 2007
Location: NUNYA
Posts: 4,236
Year: 1995
Coachwork: Thomas
Chassis: 3800
Engine: DT408, AT545
Rated Cap: 23 500 gvw
Tracy. If you take I5 to So Cal, you probably come within a few miles of me.
__________________
I'm hungry!

You Gotta Let Me Fly
crazycal is offline   Reply With Quote
Old 03-28-2007, 12:42 AM   #10
Bus Geek
 
Elliot Naess's Avatar
 
Join Date: Oct 2005
Location: Clearlake, Northern California
Posts: 2,505
Year: 1992
Coachwork: Blue Bird
Chassis: TC-2000 Frt Eng, Tranny:MT643
Engine: 5,9 Cummins
Rated Cap: 84
I haul freight in and out of Tracy all the time.

I'm thinking -- trying to visualize -- the problem could be that knob that you have
to push in for the shifter to go in certain gears. You probably have to squeeze
that knob to get into reverse?

A: The knob mechanism is worn?

B: You need to use the knob to get into 2nd and you didn't?

Just brainstorming. Too dark out there to get into Millicent to see how that one works.
__________________

Elliot Naess is offline   Reply With Quote
Old 03-28-2007, 11:51 PM   #11
Bus Geek
 
Elliot Naess's Avatar
 
Join Date: Oct 2005
Location: Clearlake, Northern California
Posts: 2,505
Year: 1992
Coachwork: Blue Bird
Chassis: TC-2000 Frt Eng, Tranny:MT643
Engine: 5,9 Cummins
Rated Cap: 84
I have to press the button on my shifter to move between ANY positions.
__________________

Elliot Naess is offline   Reply With Quote
Old 03-29-2007, 08:01 AM   #12
Moderator
 
crazycal's Avatar
 
Join Date: Feb 2007
Location: NUNYA
Posts: 4,236
Year: 1995
Coachwork: Thomas
Chassis: 3800
Engine: DT408, AT545
Rated Cap: 23 500 gvw
That's the same with mine. It just wont go lower than third.
__________________
I'm hungry!

You Gotta Let Me Fly
crazycal is offline   Reply With Quote
Old 03-29-2007, 10:46 AM   #13
Bus Geek
 
Elliot Naess's Avatar
 
Join Date: Oct 2005
Location: Clearlake, Northern California
Posts: 2,505
Year: 1992
Coachwork: Blue Bird
Chassis: TC-2000 Frt Eng, Tranny:MT643
Engine: 5,9 Cummins
Rated Cap: 84
Then I agree that exploratory surgery is indicated. Wait... crawl underneath
first and look for something really simple like a piece of angle iron bolted to the
tranny to stop the lever (if there is an external lever).
__________________

Elliot Naess is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shifter Knob Extravaganza bus-ted Everything Else | General Skoolie Discussions 4 06-05-2010 11:00 PM
WTB: headers and a shifter the_experience03 Classifieds | Buy, Sell, Swap 3 06-29-2007 05:28 PM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:52 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.