bubb, the real one bubb, the real one is offline

Almost There

Profile Comments

Showing Profile Comments 1 to 1 of 1
  1. bubb, the real one
    I have already posted pictures of each end of the fuel tank mount, the tank is held on with 4 vertical pieces bolted to the frame, this is one of the two verticals that are bolted to the inside of the frame, 2in square tube at 11ga, it has 2 bolts that are 3/8in and 4 bolts that are 1/4in connecting it to the frame, and two 3/8 bolts connecting the horizontal to the vertical piece, all are grade 8 bolts.
    Each of the 4 verticals have over 10 tons of bolt strength, which is similar to my calculations for how much bolt strength is on the original fuel tanks 3 hangers,
    You can see 2 chains in this picture, the top chain has a 1/2in bolt holding it to the frame, it is the one that goes over the tank to the other end of the horizontal piece, the lower chain connects the frame to the vertical piece so the vertical piece can not slide down the frame piece

About Me

  • About bubb, the real one
    My Bus
    central texas
    Rated Cap.
  • Signature
    my bus thread, http://www.skoolie.net/forums/showthread.php?t=8860&highlight=bubb


Total Posts
Profile Comments
General Information
  • Last Activity: 10-15-2016 09:17 AM
  • Join Date: 12-20-2014
  • Referrals: 0

All times are GMT -5. The time now is 09:38 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.