School Bus Conversion Resources

School Bus Conversion Resources (http://www.skoolie.net/forums/)
-   Short-Bus Conversion Projects (http://www.skoolie.net/forums/f27/)
-   -   E450 skoolie conversion. (http://www.skoolie.net/forums/f27/e450-skoolie-conversion-16102.html)

Sceep 12-14-2016 09:20 AM

E450 skoolie conversion.
 
Picked this up back in May, have been working on it here and there since.

A lot of the following is cut and paste from some other message boards I'm on so please excuse anything that doesn't really make sense. :biggrin:

1998 E450 shortbus popped up on craigs and I grabbed it. 7.3 powerstroke, auto, 90k miles. rear heat and ac. decent tires. Previous owner plasti-diped the thing black :(

Drove it home for $3800. :eek:

http://sceep.boogerwelds.com/sob/shortbus/1stfire.jpg
http://sceep.boogerwelds.com/sob/shortbus/bus.jpg

Buddy of mine donated some reclining seats with belts from his church bus, Stole the table outtah a pop-up that I got for free a few years ago.
http://sceep.boogerwelds.com/sob/shortbus/dinette.jpg

Gutted an old slide in of its sink/stove/oven/fridge/freezer/furnace. Only installing sink right now so I can get it titled. Scored a free cabinet. Built a countertop/back splash out of a piece of cutting board that came out of my moms restaurant. Took the drawer out of the top of the cabinet, screwed it to another drawer, and integrated it into the backsplash. Had a set of bunks from a previous enclosed trailer/camper we had.
http://sceep.boogerwelds.com/sob/shortbus/sink.jpg

Have a motorcycle event at the end of the month so need to be able to get the bikes in. Stole the tailgate/ramp off our garden tractor, trailer. It can serve duty on the bus too.
As a loading ramp:
http://sceep.boogerwelds.com/sob/shortbus/ramp.jpg

Or as an out-door table/patio/dance floor (legs have been added instead of jackstand):
http://sceep.boogerwelds.com/sob/shortbus/table.jpg

To hold it in traveling position I ripped the hood latch out of a parts truck I have laying around.
http://sceep.boogerwelds.com/sob/shortbus/latch.jpg

Sceep 12-14-2016 09:21 AM

http://sceep.boogerwelds.com/sob/shortbus/swat.jpg

Took it to the mud-bogs. :D

http://sceep.boogerwelds.com/sob/shortbus/mudbogs.jpg

Got to the DMV friday and got the title converted to motorhome and an RV plate! :bounce:

Bikes fit nicely.
http://www.pirate4x4.com/forum/attac...ild-bikes2.jpg

http://www.pirate4x4.com/forum/attac...uild-bikes.jpg

Sceep 12-14-2016 09:28 AM

Got some shelving installed for helmets/tools/tubes/filter stuff/parts/race radios

http://advrider.com/index.php?attach...ve-jpg.558776/


This weekend (while it was over 100* and the "perfect" time to work on a black bus) it got window screens, Autometer trans temp gauge, Tekonsha P3 brake controller, scangauge2, futon for couch/bed, and a 52" curved led bar(hey it was cheap AF and the headlights on this thing SUCK). I also couldn't find any hitch I was happy with so I bit the bullet and built one into the frame/bumper and added a 7 pin connector. Also got the wig wag school bus lights to work!

http://www.pirate4x4.com/forum/attac...ild-lights.jpg

http://www.pirate4x4.com/forum/attac...uild-futon.jpg

http://www.pirate4x4.com/forum/attac...uild-hitch.jpg

http://www.pirate4x4.com/forum/attac...ild-gauges.jpg

http://www.pirate4x4.com/forum/attac...ld-screens.jpg

The BS Velcro mounting provided with the scangauge was a joke. Melted off the dash overnight. So I designed up and printed a mount for it.

http://www.pirate4x4.com/forum/attac...8_18352000.jpg

Sceep 12-14-2016 09:30 AM

Integrated cupholders, roof vent bug screen, disco ball, Awning, and loaded up.

http://www.pirate4x4.com/forum/attac...cupholders.jpg

http://www.pirate4x4.com/forum/attac...neckognize.jpg

the bus did FANTASTIC on its first trip.

1000 miles towing the bronco and trailer through NM and the high passes of CO. 8 days of camping with the family of 4.

Lowest speed attained while climbing I-17 up Loveland pass up to the Eisenhower tunnel was 32mph.
Highest trans temp recorded @ 190*f.
Highest engine oil temp recorded @ 227*f.
Engine coolant temp gauge (factory) barely ever moved.
Average trip moving speed 60.1 mph.
Average 9.1 mpg.

Everyone who saw it loved it.
The awning was fan-freaking-tastic to have during the afternoon monsoons.
The discoball made everything sparkly all the time.
Window screens were un-needed as there were few bugs on this trip
The headlights SUCK and will be addressed before the next outing.
Need to do some brake work. An emergency braking scenario was made much more exciting by the lack of braking power, and the locking up front drivers wheel.
All and all, super pleased.

Sceep 12-14-2016 09:41 AM

http://sceep.boogerwelds.com/sob/shortbus/swat.jpg

Took it to the mud-bogs. :D

http://sceep.boogerwelds.com/sob/shortbus/mudbogs.jpg

Got to the DMV friday and got the title converted to motorhome and an RV plate! :bounce:

Bikes fit nicely.

http://www.pirate4x4.com/forum/attac...ild-bikes2.jpg

http://www.pirate4x4.com/forum/attac...uild-bikes.jpg

Got some shelving installed for helmets/tools/tubes/filter stuff/parts/race radios

http://advrider.com/index.php?attach...ve-jpg.558776/

Just about finished up for this go-round.

Sceep 12-14-2016 09:42 AM

Big campout coming with a quickness.

This weekend (while it was over 100* and the "perfect" time to work on a black bus) it got window screens, Autometer trans temp gauge, Tekonsha P3 brake controller, scangauge2, futon for couch/bed, and a 52" curved led bar(hey it was cheap AF and the headlights on this thing SUCK). I also couldn't find any hitch I was happy with so I bit the bullet and built one into the frame/bumper and added a 7 pin connector. Also got the wig wag school bus lights to work!

http://www.pirate4x4.com/forum/attac...ild-lights.jpg
http://www.pirate4x4.com/forum/attac...uild-futon.jpg
http://www.pirate4x4.com/forum/attac...uild-hitch.jpg
http://www.pirate4x4.com/forum/attac...ild-gauges.jpg
http://www.pirate4x4.com/forum/attac...ld-screens.jpg

The BS Velcro mounting provided with the scangauge was a joke. Melted off the dash overnight. So I designed up and printed a mount for it
http://www.pirate4x4.com/forum/attac...8_18352000.jpg

Sceep 12-14-2016 09:42 AM

Integrated cupholders, roof vent bug screen, disco ball, Awning, and loaded up.
http://www.pirate4x4.com/forum/attac...cupholders.jpg

http://www.pirate4x4.com/forum/attac...neckognize.jpg

The bus did FANTASTIC on its first big trip

1000 miles towing the bronco and trailer through NM and the high passes of CO. 8 days of camping with the family of 4.

Lowest speed attained while climbing I-17 up Loveland pass up to the Eisenhower tunnel was 32mph.
Highest trans temp recorded @ 190*f.
Highest engine oil temp recorded @ 227*f.
Engine coolant temp gauge (factory) barely ever moved.
Average trip moving speed 60.1 mph.
Average 9.1 mpg.

Everyone who saw it loved it.
The awning was fan-freaking-tastic to have during the afternoon monsoons.
The discoball made everything sparkly all the time.
Window screens were un-needed as there were few bugs on this trip
The headlights SUCK and will be addressed before the next outing.
Need to do some brake work. An emergency braking scenario was made much more exciting by the lack of braking power, and the locking up front drivers wheel.
Nothing ever fell off the shelf.

All and all, super pleased.

Need a fridge and stove.

Sceep 12-14-2016 09:43 AM

Had to cut a big ol hole in the side for the LP fridge ventilation.
http://sceep.boogerwelds.com/sob/sho...fridgevent.jpg

got that all installed, had to remove the lower window for upper ventilation (not installed yet)
http://sceep.boogerwelds.com/sob/sho...ridgevent2.jpg

free fridge, cooktop and countertop. Dunno if I'll put a drawer under the stove, or just box it out for a small storage compartment. still need to add a backsplash and caulk everything.
http://sceep.boogerwelds.com/sob/shortbus/galley1.jpg
http://sceep.boogerwelds.com/sob/shortbus/galley2.jpg

Next on the list install furnace, run lp lines, mount tanks. Then get sink finished, add fresh and greywater tanks and heat exchanger.

Tango 12-14-2016 09:43 AM

Lookin' Good! What kind of scooter do you ride/race?

Sceep 12-14-2016 09:43 AM

Got the doghouse built for the furnace.
http://sceep.boogerwelds.com/sob/shortbus/furnace1.jpg

Fitted the backsplash then dad went nuts and trimmed it all out!
http://sceep.boogerwelds.com/sob/shortbus/trim3.jpg
http://sceep.boogerwelds.com/sob/shortbus/trim1.jpg
http://sceep.boogerwelds.com/sob/shortbus/trim2.jpg

Couldn't find an acceptable (to me) solution to mounting the LP tanks so I picked up a couple forklift straps and we hacked into them sat. Had to add some structure to mount them, as well as support the bottle and make them lockable.

http://sceep.boogerwelds.com/sob/shortbus/lp1.jpg

dunno why the left tank looks like its sitting all funky compared to the right one. Its all square and true. Will have to look into that as its buggin the **** outtah me.
http://sceep.boogerwelds.com/sob/shortbus/lp2.jpg

Then moved on to some bed rails to keep our butts from falling outtah the dang bunk.

http://sceep.boogerwelds.com/sob/shortbus/bedrails.jpg


All times are GMT -5. The time now is 09:03 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.