Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Display Modes
 
Old 11-08-2021, 02:53 PM   #1
New Member
 
Join Date: Nov 2021
Location: Upstate NY
Posts: 2
Year: 2014
Coachwork: IC BUS
Chassis: CE 300
Engine: Maxxforce 7
Rated Cap: 66
Question Cut Off Stop Signs now my air door isn't working

Hi all. Hoping someone can give me some advice. I have a 2014 IC CE300 that I'm starting the process of converting into a RV with. I ended up pulling fuses until I found which ones ran the stop sign lights and master switch. thought all was well until I went to open my door with the steering wheel control. When I flip the emergency switch to automatic the doors close as normal but when I push the steering wheel switch I hear what sounds like a relay to the left of me probably coming from the relays/fuses but the door doesn't move. If i switch to emergency open the doors will push open manually with my hand and when I flip the switch back to auto it will slam shut. Not sure what's going on. I've tried adjusting the pressures valves in the fuse panel outside and that hasn't made a difference. When I open the top of the door's compartment, it has air pressure according to the PSI gauge. Not sure if there is some failsafe that will stop the door from opening when the stop signs aren't functioning? Anyone have any ideas? I've checked fuses and everything seems ok.

Thanks in advance!
-Shield

Shield1984 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:42 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.