Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Display Modes
 
Old 02-01-2018, 03:11 PM   #1
Mini-Skoolie
 
Join Date: Jan 2018
Location: Milwaukee Wisconsin
Posts: 54
Year: '95
Coachwork: Thomas Vista
Chassis: International 3600
Engine: T444/at545
Rated Cap: 72? 11 window...
Insulation outside?

Hi,
Ive heard of and like the idea of spray foam insulation on the undercarriage instead of thicker floors costing headroom.

Ive also planned on a rooftop deck with sprayfoam beneath it (ontop of roof, underneath deck) for similar space saving reasons.

This made me curious as to the notion of adhearing foam board insulation on the outside of the walls, probably from the running boards to the bottom edge of the windows. Similar space saving notion. One could then make a fiberglass shell on top of the foam board to seal it and make it road worthy.

Has anyone heard of something like this? Any thoughts?


Sent from my SM-G950U using Tapatalk

xalv36963 is offline   Reply With Quote
Old 02-01-2018, 03:31 PM   #2
Bus Nut
 
DreamWeaverBus's Avatar
 
Join Date: Aug 2016
Location: So Ill
Posts: 267
Year: 2002
Coachwork: Thomas
Chassis: Freightliner
Engine: Cummins 5.9 Allison AT545
Rated Cap: 71
Hi! I'll let the experienced talk about outside insulation, but I wanted to chip in to say, I plan on a rooftop deck too, but aside from painting the entire roof white, I plan to leave the space between the deck and bus bare.

Because unless I'm mistaken, insulating between the deck and bus sounds superfluous and will possibly make your bus into a summer oven.

The deck will shade the bus where it's at, and the white paint will reflect as much light as it can. And a breeze can aerate between the bus and deck, keeping the air moving and cool.

But it could depend on whether you plan to be somewhere warm or cold.
DreamWeaverBus is offline   Reply With Quote
Old 02-01-2018, 03:35 PM   #3
Bus Geek
 
Robin97396's Avatar
 
Join Date: Feb 2016
Location: Willamina, Oregon
Posts: 6,409
Coachwork: 97 Bluebird TC1000 5.9
A few of us have wanted to insulate under the floor of our buses. It turns out that's kind of complicated and difficult to do, and then if not done right it tends to hold water between itself and the metal skin. That's pretty much the issue with exterior insulation on the roof and exterior walls too.

Some buses come from the factory with sprayfoam under the floor. If you crawl under your bus you'll notice how difficult it would be to apply sprayfoam to the underside of the floor. I wouldn't want to be the spray guy laying on my back with all that insulation falling on me.

Maybe if you could take the bus body off the frame so it could be prepped properly? Most of us have decided it just isn't worth it to save an inch. It might be less work than a roof raise.
__________________
Robin
Nobody's Business
Robin97396 is offline   Reply With Quote
Old 02-01-2018, 03:41 PM   #4
Bus Nut
 
DreamWeaverBus's Avatar
 
Join Date: Aug 2016
Location: So Ill
Posts: 267
Year: 2002
Coachwork: Thomas
Chassis: Freightliner
Engine: Cummins 5.9 Allison AT545
Rated Cap: 71
Just had a thought: could this be one of those times when, rather than spray foam, reflectix comes in handy?
DreamWeaverBus is offline   Reply With Quote
Old 02-01-2018, 03:41 PM   #5
Mini-Skoolie
 
Join Date: Jan 2018
Location: Milwaukee Wisconsin
Posts: 54
Year: '95
Coachwork: Thomas Vista
Chassis: International 3600
Engine: T444/at545
Rated Cap: 72? 11 window...
Quote:
Originally Posted by DreamWeaverBus View Post
Hi! I'll let the experienced talk about outside insulation, but I wanted to chip in to say, I plan on a rooftop deck too, but aside from painting the entire roof white, I plan to leave the space between the deck and bus bare.

Because unless I'm mistaken, insulating between the deck and bus sounds superfluous and will possibly make your bus into a summer oven.

The deck will shade the bus where it's at, and the white paint will reflect as much light as it can. And a breeze can aerate between the bus and deck, keeping the air moving and cool.

But it could depend on whether you plan to be somewhere warm or cold.
Hmmm those are really good points, also the weight of all that foam up high. Ive also heard of people doung as youve described with great effect.

Sent from my SM-G950U using Tapatalk
xalv36963 is offline   Reply With Quote
Old 02-01-2018, 03:45 PM   #6
Bus Nut
 
DreamWeaverBus's Avatar
 
Join Date: Aug 2016
Location: So Ill
Posts: 267
Year: 2002
Coachwork: Thomas
Chassis: Freightliner
Engine: Cummins 5.9 Allison AT545
Rated Cap: 71
Yeah a deck and solar panels is all I wanna put on the top, not a fan of being top heavy... Also why I don't plan on a roof raise but I have what turns out to be an advantage here: being short-ish.
DreamWeaverBus is offline   Reply With Quote
Old 02-01-2018, 03:45 PM   #7
Mini-Skoolie
 
Join Date: Jan 2018
Location: Milwaukee Wisconsin
Posts: 54
Year: '95
Coachwork: Thomas Vista
Chassis: International 3600
Engine: T444/at545
Rated Cap: 72? 11 window...
I have looked under there extensively, and even though my underbody is very very clean the prep work for spray foam would be immense (wire wheeling, sanding, sealing any vunerable-to-being-foamy components, priming etc.) not to mention the spray job itself.

What about rigid foam boards for the undercarriage between the tertiary frame crossmembers? Could be almost as effective (say 50-70% or so) for seemingly less work...

Sent from my SM-G950U using Tapatalk
xalv36963 is offline   Reply With Quote
Old 02-01-2018, 03:47 PM   #8
Mini-Skoolie
 
Join Date: Jan 2018
Location: Milwaukee Wisconsin
Posts: 54
Year: '95
Coachwork: Thomas Vista
Chassis: International 3600
Engine: T444/at545
Rated Cap: 72? 11 window...
Yeah as an official spokeman of the >6' crowd i say when it comes to skoolies and sailing yachts - you win this round shorty [emoji16][emoji482]

Sent from my SM-G950U using Tapatalk
xalv36963 is offline   Reply With Quote
Old 02-01-2018, 03:52 PM   #9
Mini-Skoolie
 
Join Date: Jan 2018
Location: Milwaukee Wisconsin
Posts: 54
Year: '95
Coachwork: Thomas Vista
Chassis: International 3600
Engine: T444/at545
Rated Cap: 72? 11 window...
So has anyone heard of or considered exterior sidewall insulation? Seems somewhat excessive considering the simplicity of interior wall insulation ...

Sent from my SM-G950U using Tapatalk
xalv36963 is offline   Reply With Quote
Old 02-01-2018, 04:08 PM   #10
Traveling
 
Join Date: Nov 2015
Location: Midwest
Posts: 2,573
Year: 2003
Coachwork: BlueBird
Chassis: TC2000
Engine: 5.9L Cummins
Rated Cap: '00
Quote:
Originally Posted by xalv36963 View Post
So has anyone heard of or considered exterior sidewall insulation? Seems somewhat excessive considering the simplicity of interior wall insulation ...
It would:
  • make your bus wider on the road a bit
  • would be tough to conform to rivets and rub rails
  • Tough to seal against water
  • Not be cheap as it would need to be clad

Mine was factory sprayfoamed by Bluebird, including underneath. Shell was suspended and sprayed prior to installation on chassis. Is nice. Bonus is: really weatherproofs- Ziebart on steroids, for you old timers. Scrape-off a hunk and is like new underneath. They shot inside the wheel wells, too= quieter.
Rusty is offline   Reply With Quote
Old 02-01-2018, 04:21 PM   #11
Bus Nut
 
Jdawgsfanasty's Avatar
 
Join Date: Dec 2017
Posts: 973
Quote:
Originally Posted by Rusty View Post
It would:
  • make your bus wider on the road a bit
  • would be tough to conform to rivets and rub rails
  • Tough to seal against water
  • Not be cheap as it would need to be clad

Mine was factory sprayfoamed by Bluebird, including underneath. Shell was suspended and sprayed prior to installation on chassis. Is nice. Bonus is: really weatherproofs- Ziebart on steroids, for you old timers. Scrape-off a hunk and is like new underneath. They shot inside the wheel wells, too= quieter.
How new is your bird rusty? It would sure shorten the build time...

Sent from my VS500PP using Tapatalk
Jdawgsfanasty is offline   Reply With Quote
Old 02-01-2018, 04:29 PM   #12
Mini-Skoolie
 
Join Date: Jan 2018
Location: Milwaukee Wisconsin
Posts: 54
Year: '95
Coachwork: Thomas Vista
Chassis: International 3600
Engine: T444/at545
Rated Cap: 72? 11 window...
Quote:
Originally Posted by Rusty View Post
It would:
  • make your bus wider on the road a bit
  • would be tough to conform to rivets and rub rails
  • Tough to seal against water
  • Not be cheap as it would need to be clad

Mine was factory sprayfoamed by Bluebird, including underneath. Shell was suspended and sprayed prior to installation on chassis. Is nice. Bonus is: really weatherproofs- Ziebart on steroids, for you old timers. Scrape-off a hunk and is like new underneath. They shot inside the wheel wells, too= quieter.
You are correct on all points of course.

I figured schmucking on a diy fiberglass shell but just ran the cost and itd be well in excess of $3k for the materials (not including the insulation itself) but would protect against wind, water, outsideness etc.

The width increase would be way less than the width mirror to mirror so not too much concern.

Fitting the board to all the grooves and nubbins on the exterior would be significantly troublesome for sure.

Given the above, i will not be pursuing this concept further lol - thank you for the excellent sounding board [emoji16]

Sent from my SM-G950U using Tapatalk
xalv36963 is offline   Reply With Quote
Old 02-01-2018, 04:53 PM   #13
Bus Geek
 
Tango's Avatar
 
Join Date: Mar 2011
Location: Houston, Texas
Posts: 8,462
Year: 1946
Coachwork: Chevrolet/Wayne
Chassis: 1- 1/2 ton
Engine: Cummins 4BT
Rated Cap: 15
The only buses I have ever seen with insulation on the outside were a couple of Hippie rigs back in the late '60's. They stuck insulation board (of unknown type) on the outside, then attached wood siding & shingles over it. Lots of weight added as well.
Tango is offline   Reply With Quote
Old 02-01-2018, 05:04 PM   #14
Bus Nut
 
Jdawgsfanasty's Avatar
 
Join Date: Dec 2017
Posts: 973
Quote:
Originally Posted by Tango View Post
The only buses I have ever seen with insulation on the outside were a couple of Hippie rigs back in the late '60's. They stuck insulation board (of unknown type) on the outside, then attached wood siding & shingles over it. Lots of weight added as well.
I should've known you were a flower child[emoji2][emoji2][emoji2][emoji2]

Sent from my VS500PP using Tapatalk
Jdawgsfanasty is offline   Reply With Quote
Old 02-01-2018, 05:25 PM   #15
Bus Geek
 
Tango's Avatar
 
Join Date: Mar 2011
Location: Houston, Texas
Posts: 8,462
Year: 1946
Coachwork: Chevrolet/Wayne
Chassis: 1- 1/2 ton
Engine: Cummins 4BT
Rated Cap: 15
I have to admit, at the time I thought they were pretty groovy. If I remember right, one of them had the name "Trippy" painted on it surrounded by lots of RICKIE TICKIE STICKIES.

Far off, man.
Tango is offline   Reply With Quote
Old 02-01-2018, 05:54 PM   #16
Traveling
 
Join Date: Nov 2015
Location: Midwest
Posts: 2,573
Year: 2003
Coachwork: BlueBird
Chassis: TC2000
Engine: 5.9L Cummins
Rated Cap: '00
Quote:
Originally Posted by Tango View Post
I have to admit, at the time I thought they were pretty groovy. If I remember right, one of them had the name "Trippy" painted on it surrounded by lots of RICKIE TICKIE STICKIES.

Far off, man.
I hear, ya man. I can almost see it now...

Click image for larger version

Name:	daisy-clipart-groovy-11.gif
Views:	5
Size:	47.9 KB
ID:	18813
Rusty is offline   Reply With Quote
Old 02-01-2018, 05:58 PM   #17
Bus Nut
 
Jdawgsfanasty's Avatar
 
Join Date: Dec 2017
Posts: 973
Quote:
Originally Posted by Tango View Post
I have to admit, at the time I thought they were pretty groovy. If I remember right, one of them had the name "Trippy" painted on it surrounded by lots of RICKIE TICKIE STICKIES.

Far off, man.
[emoji2][emoji2][emoji2][emoji2]Been a skoolie nut ever since:thumbs up:

Sent from my VS500PP using Tapatalk
Jdawgsfanasty is offline   Reply With Quote
Old 02-01-2018, 06:01 PM   #18
Bus Nut
 
Jdawgsfanasty's Avatar
 
Join Date: Dec 2017
Posts: 973
Quote:
Originally Posted by Rusty View Post
I hear, ya man. I can almost see it now...

Attachment 18813
Hey...I might want to paint some of these on my skoolie[emoji2][emoji2][emoji2]
https://youtu.be/anPuND37D_c

Sent from my VS500PP using Tapatalk
Jdawgsfanasty is offline   Reply With Quote
Old 02-02-2018, 10:15 AM   #19
Bus Geek
 
Tango's Avatar
 
Join Date: Mar 2011
Location: Houston, Texas
Posts: 8,462
Year: 1946
Coachwork: Chevrolet/Wayne
Chassis: 1- 1/2 ton
Engine: Cummins 4BT
Rated Cap: 15
Believe it or not...I just saw some New old stock, genuine RICKIE TICKIE STICKIES for sale on Ebay. Go get'em!
Tango is offline   Reply With Quote
Old 02-02-2018, 10:57 AM   #20
Bus Nut
 
Jdawgsfanasty's Avatar
 
Join Date: Dec 2017
Posts: 973
Quote:
Originally Posted by Tango View Post
Believe it or not...I just saw some New old stock, genuine RICKIE TICKIE STICKIES for sale on Ebay. Go get'em!
Lol

Sent from my VS500PP using Tapatalk
Jdawgsfanasty is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.