Problem with Smoke in the Air after Henry’s application?

[rydawg3000]

Hey all,

Kind of a strange scenario. We took the bus to a local empty Winn-Dixie parking lot to paint it with Henry’s Envirowhite. Earlier in the day, there was a “controlled burn” of 300 acres in a nearby forest to my house which is only about 3 miles from the Winn Dixie. It got out of control and has sent the surrounding 2 miles of area into a smoke fog now that it is smoldering. We had slight bits of Ash after our first coat, then the ash stopped and winds calmed before we applied our final coat.

Is there any issue with me driving the bus home if it is still smoky but no ash is falling? Will it cause a Smokey hue to form on the outside since the Henry’s might still be curing a little bit?

The job looks great and is dry to the touch, but we are afraid to drive the bus home if smoke will cause an issue.

Thanks, Katie and Ryan

[Booyah45828]

If it's dry to the touch, I wouldn't be too concerned about it.

[rydawg3000]

Word, that’s what I was thinking because it dries so quick. As long as we don’t have any more ash flying around tonight, I feel alright with it. We’ll see how it goes in the morning.