Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Display Modes
 
Old 08-05-2013, 04:58 PM   #1
Bus Nut
 
wmkbailey's Avatar
 
Join Date: Jun 2013
Location: West Lafayette, IN
Posts: 832
Year: 1999
Coachwork: Thomas
Engine: 3126
Rated Cap: 72
Ugh, the not square Thomas buses.

If you plan to raise your roof, get a Bluebird. Thomas buses are not square.

The first issue I had was the fact that the windows lean in about an inch.



After I raise the roof 10" the post will not line up.

Some people smarter than me said this is easy to take care of. I just have to cut the top post on the left side and move it left. Cut the bottom post on the right side and move it right until they line back up. Then weld where you cut. Repeat for me 22 times. I'm only raising from the first to the 11th window.

Now I need help from those smart people. Unlike a Bluebird my post are not square tubing. It is U channel, and it is not square.



Any ideas on how to re- attach? I was going to use 1 1/4" square tubing until I found out it is not square. I want to put a piece in from the top to the bottom of the window area and weld to the existing.

__________________
William

visvi Cherokee for Journey, Sounds Like Oeesha

https://thejourneyvisvi.com/

My Conversion Thread:
viewtopic.php?f=9&t=464989
wmkbailey is offline   Reply With Quote
Old 08-05-2013, 05:58 PM   #2
Bus Crazy
 
Accordion's Avatar
 
Join Date: Aug 2011
Location: Central Tennessee
Posts: 1,093
Year: 1973
Coachwork: Blue Bird
Chassis: All American
Engine: CAT 1160 V-8 Diesel
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

I can understand raising the roof if you are too tall to walk in it comfortably. Consider, however, that you will be sitting in your bus 90% of the time.

Someday, I may "raise" my roof. My approach will be different.

I will cut an access hole in the roof. I will weld the top half of a full size van to the bus. I will then make the van addition into a bedroom.
__________________
Best Home Yet - Strong Command Center --- viewtopic.php?f=9&t=10764
Accordion is offline   Reply With Quote
Old 08-05-2013, 06:03 PM   #3
Bus Nut
 
wmkbailey's Avatar
 
Join Date: Jun 2013
Location: West Lafayette, IN
Posts: 832
Year: 1999
Coachwork: Thomas
Engine: 3126
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

Once I re-insulate my interior height will be 6' and I'm 6' tall. I want a little head room. I always where a ball cap and rubbing that buton on the top into my head does not sound like fun
__________________
William

visvi Cherokee for Journey, Sounds Like Oeesha

https://thejourneyvisvi.com/

My Conversion Thread:
viewtopic.php?f=9&t=464989
wmkbailey is offline   Reply With Quote
Old 08-05-2013, 06:29 PM   #4
Bus Nut
 
Join Date: Jun 2013
Location: Southern Maine
Posts: 337
Re: Ugh, the not square Thomas buses.

You could always just learn how to slouch.... I'm sure with a bit of practice you could easily gain 2 inches of headroom that way!

Or You could insulate the floor from the bottom... and leave that inch or so on top.
Malkieri is offline   Reply With Quote
Old 08-05-2013, 06:50 PM   #5
Bus Geek
 
bansil's Avatar
 
Join Date: Nov 2011
Location: MNT CITY TN
Posts: 5,158
Re: Ugh, the not square Thomas buses.

Use round tubing, .083 wall (14 ga) easy to weld no blow thru(like thin and it will "pull everything into a comfort zone...you can only weld what you can see!
__________________
Our build La Tortuga
Accept the challenges so that you can feel the exhilaration of victory.
George S. Patton
bansil is offline   Reply With Quote
Old 08-05-2013, 06:56 PM   #6
Bus Geek
 
bansil's Avatar
 
Join Date: Nov 2011
Location: MNT CITY TN
Posts: 5,158
Re: Ugh, the not square Thomas buses.

Make the 1-1/8 dia pcs (do not use DOM too much $$) about 23-7/8 long this will allow saw cut and plenty of strength

If you need help pm me and I will call at work and hook you up to possible sources.

So a 24 foot stick will give you 12 pcs

Cut roof the same way top to bottom toallow angle change when you clamp the 1-1/8 in it will align it mostly
__________________
Our build La Tortuga
Accept the challenges so that you can feel the exhilaration of victory.
George S. Patton
bansil is offline   Reply With Quote
Old 08-05-2013, 06:58 PM   #7
Bus Nut
 
wmkbailey's Avatar
 
Join Date: Jun 2013
Location: West Lafayette, IN
Posts: 832
Year: 1999
Coachwork: Thomas
Engine: 3126
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

When I first stared to research living in a school bus, head room was something I was concerned about. When I found this article:http://www.gumpydog.com/Bus/MC9_WIP/...g_the_roof.htm

Lights went off. If he could raise the roof of a MC9 transit bus. A school bus should not be any more difficult. Then I read:
The Millicent Chronicles; two foot roof raise, big tailgate

Now I want to do this. No turning back.
__________________
William

visvi Cherokee for Journey, Sounds Like Oeesha

https://thejourneyvisvi.com/

My Conversion Thread:
viewtopic.php?f=9&t=464989
wmkbailey is offline   Reply With Quote
Old 08-05-2013, 07:00 PM   #8
Bus Geek
 
bansil's Avatar
 
Join Date: Nov 2011
Location: MNT CITY TN
Posts: 5,158
Re: Ugh, the not square Thomas buses.

Round tubing is stronger than sq or rect. Same size,going with 1/8 is way overkill....it is just so easy to weld with longer duty cycle welders except dynasty series millers...they are "bible banging"
__________________
Our build La Tortuga
Accept the challenges so that you can feel the exhilaration of victory.
George S. Patton
bansil is offline   Reply With Quote
Old 08-05-2013, 07:00 PM   #9
Bus Nut
 
wmkbailey's Avatar
 
Join Date: Jun 2013
Location: West Lafayette, IN
Posts: 832
Year: 1999
Coachwork: Thomas
Engine: 3126
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

Quote:
Originally Posted by bansil
Make the 1-1/8 dia pcs (do not use DOM too much $$) about 23-7/8 long this will allow saw cut and plenty of strength

If you need help pm me and I will call at work and hook you up to possible sources.

So a 24 foot stick will give you 12 pcs

Cut roof the same way top to bottom toallow angle change when you clamp the 1-1/8 in it will align it mostly
You told me on my post about using round tubing, I guess it did not sink in. Thanks.
__________________
William

visvi Cherokee for Journey, Sounds Like Oeesha

https://thejourneyvisvi.com/

My Conversion Thread:
viewtopic.php?f=9&t=464989
wmkbailey is offline   Reply With Quote
Old 08-06-2013, 06:42 AM   #10
Skoolie
 
Join Date: Sep 2012
Location: Massachusetts.
Posts: 196
Year: 1999
Coachwork: Thomas
Chassis: Saf-t-liner
Engine: Cat 3126 - MD 3060
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

How much welding do you do? If your good enough you would just get the smaller size square tubing, 1-1/8 I think It was. So 1-1/8 square tubing and just fill the gap where it widens to 1-1/4. i have done wider than that, i eyeball a lot of stuff i make and have to most of the time. Would be very easy, and would help if you cut one all beam piece out and used it for a test weld, then just use more square tubing to fill the length you cut.
ThePimentals is offline   Reply With Quote
Old 08-06-2013, 09:02 AM   #11
Bus Nut
 
JakeC's Avatar
 
Join Date: Dec 2009
Location: MN
Posts: 732
Year: 1991
Coachwork: Wayne
Chassis: International 3800
Engine: DT466
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

I think round tubing would be a good solution, but isn't there enough flex in the channels that you could just get 1-1/8" square tubing and clamp the sides of the channel (where it is 1-1/4") to it? I have a hard time believing it would be that rigid.
__________________
The journey is the destination...

Brutus
JakeC is offline   Reply With Quote
Old 08-06-2013, 09:12 AM   #12
Bus Geek
 
bansil's Avatar
 
Join Date: Nov 2011
Location: MNT CITY TN
Posts: 5,158
Re: Ugh, the not square Thomas buses.

my thinking is this:

and only pertains to the 3 different places I buy steel at work

1-1/8 dia x .083 wall tubing ERW (not DOM) is a stocked item and this means it's a lot cheaper

1-1/8 sq tubing is only available in 18 (.049) and 16 gage (.065) sizes and is not stocked so it is more $$

just some options to look at and ERW tubing is plenty strong enough for what your doing

just my .02
__________________
Our build La Tortuga
Accept the challenges so that you can feel the exhilaration of victory.
George S. Patton
bansil is offline   Reply With Quote
Old 08-06-2013, 09:14 AM   #13
Bus Nut
 
Join Date: Nov 2008
Location: ellijay ga
Posts: 560
Year: 94
Coachwork: b/b
Chassis: tc2000
Engine: 5.9
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

that's why they had a recall on the juck bussis,they make them the chesps way and bad steel ,,buy a B/B...
keith is offline   Reply With Quote
Old 08-06-2013, 09:19 AM   #14
Bus Nut
 
wmkbailey's Avatar
 
Join Date: Jun 2013
Location: West Lafayette, IN
Posts: 832
Year: 1999
Coachwork: Thomas
Engine: 3126
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

Quote:
Originally Posted by JakeC
I think round tubing would be a good solution, but isn't there enough flex in the channels that you could just get 1-1/8" square tubing and clamp the sides of the channel (where it is 1-1/4") to it? I have a hard time believing it would be that rigid.
Quote:
Originally Posted by ThePimentals
How much welding do you do? If your good enough you would just get the smaller size square tubing, 1-1/8 I think It was. So 1-1/8 square tubing and just fill the gap where it widens to 1-1/4. i have done wider than that, i eyeball a lot of stuff i make and have to most of the time. Would be very easy, and would help if you cut one all beam piece out and used it for a test weld, then just use more square tubing to fill the length you cut.

1-1/8" square tubing is hard to find and is not very thick. Round tubing has about twice as thick a wall.
__________________
William

visvi Cherokee for Journey, Sounds Like Oeesha

https://thejourneyvisvi.com/

My Conversion Thread:
viewtopic.php?f=9&t=464989
wmkbailey is offline   Reply With Quote
Old 08-06-2013, 09:20 AM   #15
Bus Nut
 
JakeC's Avatar
 
Join Date: Dec 2009
Location: MN
Posts: 732
Year: 1991
Coachwork: Wayne
Chassis: International 3800
Engine: DT466
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

Quote:
Originally Posted by bansil
my thinking is this:

and only pertains to the 3 different places I buy steel at work

1-1/8 dia x .083 wall tubing ERW (not DOM) is a stocked item and this means it's a lot cheaper

1-1/8 sq tubing is only available in 18 (.049) and 16 gage (.065) sizes and is not stocked so it is more $$

just some options to look at and ERW tubing is plenty strong enough for what your doing

just my .02
Very good points! Never even thought of that...
__________________
The journey is the destination...

Brutus
JakeC is offline   Reply With Quote
Old 08-06-2013, 09:20 AM   #16
Bus Nut
 
wmkbailey's Avatar
 
Join Date: Jun 2013
Location: West Lafayette, IN
Posts: 832
Year: 1999
Coachwork: Thomas
Engine: 3126
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

Quote:
Originally Posted by keith
that's why they had a recall on the juck bussis,they make them the chesps way and bad steel ,,buy a B/B...
If I submit my Thomas bus for the recall will they replace it with a Bluebird?
__________________
William

visvi Cherokee for Journey, Sounds Like Oeesha

https://thejourneyvisvi.com/

My Conversion Thread:
viewtopic.php?f=9&t=464989
wmkbailey is offline   Reply With Quote
Old 08-06-2013, 07:07 PM   #17
Bus Nut
 
Join Date: Nov 2008
Location: ellijay ga
Posts: 560
Year: 94
Coachwork: b/b
Chassis: tc2000
Engine: 5.9
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

they just tell u sorry ,but u owne it,,,, they had a bad roll over facter,if u roll it the roof would not hold up,,,it was on the news and a lot of them went thougth a flood down south here so take the ser # and fine out where the bus was shipped too,,all bus companys has records of sales.



oh I see that u from my old stomping ground,,,,,i was from towson,and baltimore
keith is offline   Reply With Quote
Old 08-06-2013, 07:28 PM   #18
Bus Nut
 
Join Date: Jun 2013
Location: Southern Maine
Posts: 337
Re: Ugh, the not square Thomas buses.

I could not find any info on Thomas buses having those problems...are you sure you're not thinking of the Carpenters made in the early 90's in Mitchell factory? Those had bad welds in the roof structure, but only the Mitchell factory buses had these issues. http://www.nhtsa.gov/people/injury/b...rBus/index.htm
Malkieri is offline   Reply With Quote
Old 08-07-2013, 05:21 AM   #19
Bus Geek
 
bansil's Avatar
 
Join Date: Nov 2011
Location: MNT CITY TN
Posts: 5,158
Re: Ugh, the not square Thomas buses.

Quote:
Originally Posted by Malkieri
I could not find any info on Thomas buses having those problems...are you sure you're not thinking of the Carpenters made in the early 90's in Mitchell factory? Those had bad welds in the roof structure, but only the Mitchell factory buses had these issues. http://www.nhtsa.gov/people/injury/b...rBus/index.htm
you are correct and these are the pictures which show the differences in the buses
__________________
Our build La Tortuga
Accept the challenges so that you can feel the exhilaration of victory.
George S. Patton
bansil is offline   Reply With Quote
Old 08-07-2013, 02:51 PM   #20
Bus Nut
 
Join Date: Nov 2008
Location: ellijay ga
Posts: 560
Year: 94
Coachwork: b/b
Chassis: tc2000
Engine: 5.9
Rated Cap: 72
Re: Ugh, the not square Thomas buses.

I had to pop your cork ,,,but carputer bus is a sub div of Thomas bus div... there are four bus makers,,1-,B/B,2-,Gillion, 3-Thomas/carputer/ward/ there is a another bus company.in cal that's makes a bus


the reson I know this is I worked for B/B fort valley Ga and we would get in others makes for trade in....and would have to get parts and on there boxes was Thomas carputer ward school bus div
keith is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Square Footage? ziggy Short-Bus Conversion Projects 31 10-04-2021 11:57 AM
Awning made of square tubing garbemi Conversion Tutorials and How-to's 17 04-10-2013 08:12 PM
Plumb, level, and square? family wagon Conversion General Discussions 10 04-06-2013 11:20 AM
Need help from owners of Thomas buses, mid nineties dentedvw Conversion General Discussions 4 05-03-2010 10:27 AM
PRICE REDUCED! International Thomas School Buses DT360 Auto uglymut.com Classifieds | Buy, Sell, Swap 2 08-08-2007 03:27 PM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:15 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.