|
|
09-12-2019, 01:26 PM
|
#1
|
New Member
Join Date: Sep 2019
Location: Missouri
Posts: 5
|
What do you do with all the seats?
So what do you do with all of the seats that you just removed from your newly acquired school bus? Who would buy a bunch (or even one) old school bus seat? I'm handy enough that I suppose that I could make yard furniture or maybe something else unusual but useful out of them. Hopefully be able to sell some that way. Or, just haul 'em all down to the scrap yard and be done with it. What do you all do?
|
|
|
09-12-2019, 01:36 PM
|
#2
|
Bus Crazy
Join Date: May 2016
Location: Georgia
Posts: 2,264
Year: 2001
Coachwork: Blue Bird
Chassis: IH
Engine: T444E
Rated Cap: 14
|
I have not removed/disposed all mine yet. Never know when some random bits of metal will be useful for fabricating something.
|
|
|
09-12-2019, 01:41 PM
|
#3
|
Bus Geek
Join Date: Dec 2017
Location: Dawsonville, Ga.
Posts: 10,482
Year: 1999
Coachwork: Genesis
Chassis: International
Engine: DT466/3060
Rated Cap: 77
|
No question it was not worth fooling with. Sent them straight to scrap and paid me for them.
|
|
|
09-12-2019, 01:51 PM
|
#4
|
New Member
Join Date: Sep 2019
Location: Missouri
Posts: 5
|
Yeah, that's pretty much what I figured. I just like to re-purpose or sell when I can before deciding to scrap or trash anything.
|
|
|
09-12-2019, 03:17 PM
|
#5
|
Skoolie
Join Date: Jan 2016
Location: Foot of the siskiyou mountains Oregon.
Posts: 222
Year: 1989
Coachwork: Thomas / international
Chassis: International
Engine: Dt 360/ spicer 5 speed
Rated Cap: 42
|
I put them on the street corner with a "free" sign, Most of them disappeared. Due to the amount of people doing conversions these days, there's Not much value in old bus seats where I live.
|
|
|
09-12-2019, 03:24 PM
|
#6
|
Bus Crazy
Join Date: Nov 2015
Location: Billings, MT
Posts: 1,269
Year: 2003
Coachwork: Thomas
Chassis: HDX
Engine: Cat C7
Rated Cap: 84 passenger
|
Took mine to the scrap yard. Got paid a whopping penny a pound for them, a total of $10.
|
|
|
09-12-2019, 03:52 PM
|
#7
|
Bus Nut
Join Date: Sep 2017
Location: Damascus, OR
Posts: 681
Year: 2004
Chassis: International
Engine: T444e w/ 2000 Allison Trans
Rated Cap: 35
|
I used a few around my fire pit.
|
|
|
09-12-2019, 04:32 PM
|
#8
|
Bus Geek
Join Date: Jan 2019
Location: Philadelphia
Posts: 7,000
Year: 2003
Coachwork: International
Chassis: CE 300
Engine: DT466e
Rated Cap: 65C-43A
|
I left mine in a pile behind my bus until they were stolen along with my ceiling panels. Best theft of my life - they made off with about 3/4 of my trash pile by weight, which saved me a bunch of money and time.
I was kind of disappointed at the time since I had planned to salvage some of the metal from them for welding practice, but luckily I found a better source of scrap. To be honest, the metal from the seats is pretty much crap as far as useful material goes. The sheet metal backs are bent for strength so you can't cut any large flat pieces out of them, and the tube for the frame is similarly bent up and welded to other bits and you'd have to do a ton of prep to use it.
|
|
|
09-12-2019, 04:33 PM
|
#9
|
Bus Geek
Join Date: Jan 2019
Location: Philadelphia
Posts: 7,000
Year: 2003
Coachwork: International
Chassis: CE 300
Engine: DT466e
Rated Cap: 65C-43A
|
Quote:
Originally Posted by Rovobay
|
Did you weld an extra pair of legs on these or were all your seats like this? My seats would have been an uneven experience on the ground without further work, except for the two exit-door seats.
|
|
|
09-12-2019, 04:38 PM
|
#10
|
Bus Geek
Join Date: May 2016
Location: Eastern WA
Posts: 6,401
Year: 2002
Coachwork: Bluebird
Chassis: All American RE (A3RE)
Engine: Cummins ISC (8.3)
Rated Cap: 72
|
Offered mine for free on CL. Lots of flakes, no takers.
I took them to the salvage yard and, after a little negotiation, they agreed to take them for free.
|
|
|
09-12-2019, 04:39 PM
|
#11
|
Bus Nut
Join Date: Jul 2016
Location: Western Oregon
Posts: 876
Year: 1995
Coachwork: Blue-Bird
Chassis: TC RE 3408
Engine: 5.9 Cummins 12V Mechanical/Allison MT643
Rated Cap: Blue-Bird says 72 pass.
|
I put a free ad in the local shopping weekly for "Free schoolbus seats, you haul", and got not a single response. The first batch I took to the scrapyard and got 2.5 cents per pound, after I separated the steel from the upholstery material, which took a few hours and will not be repeated at that rate. I'm going to end up paying the county to deal with the bulk of them.
Most of my seats are not any good for sitting around the fire. I had 1 seat with 4 legs, and one seat with 3 legs, just because those seats were near an emergency exit. All the rest of my seats had only 2 legs, so they would need to be modified somehow to use as fire ring couches.
|
|
|
09-12-2019, 04:47 PM
|
#12
|
Bus Geek
Join Date: Jan 2019
Location: Philadelphia
Posts: 7,000
Year: 2003
Coachwork: International
Chassis: CE 300
Engine: DT466e
Rated Cap: 65C-43A
|
Quote:
Originally Posted by PNW_Steve
Offered mine for free on CL. Lots of flakes, no takers.
I took them to the salvage yard and, after a little negotiation, they agreed to take them for free.
|
Where my bus is parked now, the lot owner previously rented to a skoolie builder who solved the seat problem by stashing them in one of the lot owner's outbuildings and then absconding without paying rent for good measure. This made the owner not return any of my phone calls for months when I first got the bus, which forced me into parking it 40 minutes from my house and getting robbed three times.
Dispose of your seats properly, fellow skooliers!
|
|
|
09-12-2019, 04:55 PM
|
#13
|
Bus Geek
Join Date: May 2009
Location: Columbus Ohio
Posts: 18,830
Year: 1991
Coachwork: Carpenter
Chassis: International 3800
Engine: DTA360 / MT643
Rated Cap: 7 Row Handicap
|
Mine are in my busses...
-Christopher
|
|
|
09-12-2019, 09:08 PM
|
#14
|
Bus Nut
Join Date: Jan 2015
Location: Gonvick MN
Posts: 339
Year: 1975
Chassis: Gillig
Engine: Cat 3208t/10 speed transmission
|
This worked for me
__________________
Remove hence to yonder place....
|
|
|
09-12-2019, 09:15 PM
|
#15
|
Bus Nut
Join Date: Jul 2016
Location: Western Oregon
Posts: 876
Year: 1995
Coachwork: Blue-Bird
Chassis: TC RE 3408
Engine: 5.9 Cummins 12V Mechanical/Allison MT643
Rated Cap: Blue-Bird says 72 pass.
|
Yeah, I burned a few too. The smoke it made was very black. At first I couldn't believe the neighbors didn't complain. The wind blew all the black smoke right toward their deck, where I could hear them entertaining guests. Then after the fire was out I had to deal with seat-sized pieces of fiberglass cloth that didn't burn. So I quit burning seats.
|
|
|
09-21-2019, 09:59 PM
|
#16
|
Bus Nut
Join Date: Dec 2018
Location: Mt Vernon, WA
Posts: 523
Year: 1996
Coachwork: Bluebird, Collins
Chassis: G30 Bluebird Microbird, E350 Shuttle Bus
Engine: 1995 Chevrolet 350, 1992 Ford 460
|
I placed a ad on Craigslist free items and they were all gone within days. A good way to get rid of other items not wanted. And I didn’t have to haul anything.
|
|
|
09-21-2019, 10:48 PM
|
#17
|
Skoolie
Join Date: Jul 2018
Location: Olathe, Kansas
Posts: 220
Year: 1990
Coachwork: Crown
Chassis: Supercoach
Engine: 6-71TA
Rated Cap: 90
|
Placed an add on Craigslist to pick them up for Free. I just wanted them gone and did not want to have to haul them off myself.
|
|
|
09-22-2019, 02:43 AM
|
#18
|
Bus Geek
Join Date: Sep 2015
Posts: 3,856
Year: 2002
Coachwork: Thomas Built Bus
Chassis: Freightliner FS65
Engine: Caterpillar 3126E Diesel
Rated Cap: 71 Passenger- 30,000 lbs.
|
Recycled most of them. Held a couple back to be turned into workout benches.
Don't we already have a thread on this subject? I seem to remember a few other interesting uses in that thread
|
|
|
09-22-2019, 02:49 AM
|
#19
|
Bus Nut
Join Date: Jul 2019
Location: Freedom Field, New Mexico
Posts: 459
Year: 1998
Coachwork: International
Chassis: Amtrans
Engine: 444E
Rated Cap: 84 pas
|
My Aunt took 6 for her patio. A friend mounted one in his gator and took the rest for some other project. All gone the day we yanked em out. Other builds I wasn't so blessed. Couldn't pay to get rid of them. Stripped em down for their components. Metal, plywood, and naugahide. Feel sorry for all the naked naugas.
|
|
|
09-22-2019, 11:17 AM
|
#20
|
Bus Nut
Join Date: Sep 2017
Location: Damascus, OR
Posts: 681
Year: 2004
Chassis: International
Engine: T444e w/ 2000 Allison Trans
Rated Cap: 35
|
Quote:
Originally Posted by musigenesis
Did you weld an extra pair of legs on these or were all your seats like this? My seats would have been an uneven experience on the ground without further work, except for the two exit-door seats.
|
some not all of my seats were like that. it was a handicap bus and a lot of seat in the rear had both legs for different layout options.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|