Very poor uninformed posts
Please read this inquiry. I am an old guy with many years of mechanical experiences. My history is of owning 16 buses of which i still own 6 buses. I have lots of mechanical past. The suggestions by ben2go and smitty are terrible. Thanks ben2go, please just go. I do not need or want a lesson on radiator design. Do ya have a bus? Please don't give more advice till ya get a bus. To smitty, thanks, you are correct, there are radiator shops in my town. My Crown bus has a 3 part radiator. To the other post, it is my understanding that a vessel under pressure, will raise the boiling point 2 degrees for every pound of pressure. I am merely seeking a cheep easy source for buying a core size that can be bolted to my top and bottom tanks. All radiators are not one piece. My radiator is side mounted and down flow with no ram air. Side flow is used to slow the flow thru this cooling system. The core is 39 inches wide, 16 inches tall and 5 1/2 inches thick. My engine is a Cummins 14L. Poor posts are not helpful to anyone. Opinions are of less value. My last Crown core cost $1080 plus $80 shipping 3 years ago. Frank in Idaho
|