My project is a 1986 Thomas 1700s shortie.ive got the seats ripped out and I’m currently tackling the floor removal...any suggestions on wheel chair ramp removal, it functions but outside of a gantry crane not sure how I’m getter her down and out
I've removed a few of em.
Lower it to the ground, disconnect the power cable from the battery. Take the pins out of the arms on the ramp and cut the lines. pull it off in pieces/sections and its much easier. I can get one out and to the roadside in about an hour now.
You may want to leave it in during the build process, if you are going to use the bus for retrieving stuff. It will be make loading/unloading a lot easier.