Quote:
Originally Posted by jazty
Yep, easily rebuilt. The bearings aren't anything special. Read the number off the bearing and get quality replacements. I'm not too picky about Timken, NSK, etc.. For this application stay away from the unbranded crappers on amazon and eBay.
I rebuilt 3 of them. Used a vice and some appropriately sized sockets to press the bearings in place.
|
Yep, vice and sockets, that's how I plan to do it if I rebuild them.
I just talked to my local dealer, there are replacement bearings so I'll be rebuilding mine.
Linear Mode
