Cruise control does not work

[pratokko]

IC CE300,2005, dt466e enging, alison tranny, 206k

Hi. Cruise does not work. No lights come on on the 2 buttons. Does any one know how to fix this? thank you

[EastCoastCB]

Originally Posted by pratokko

IC CE300,2005, dt466e enging, alison tranny, 206k

Hi. Cruise does not work. No lights come on on the 2 buttons. Does any one know how to fix this? thank you

You need a special link and some software. You go into the computer and enable cruise.
A dealer will do it for free sometimes.

[cadillackid]

the cruise may be disabled in the computer as ECCB says.. the buttons do not light up even when cruise is enabled and active..



also note that the cruise on/off button appears "backwards".. you need to push in the bottom of the on/oiff switch to turn it ON.. which seems backwards...

-Christopher

[HazMatt]

That might be it:

Originally Posted by cadillackid

the cruise may be disabled in the computer as ECCB says.. the buttons do not light up even when cruise is enabled and active..

also note that the cruise on/off button appears "backwards".. you need to push in the bottom of the on/oiff switch to turn it ON.. which seems backwards...

-Christopher

Cruise only works when the tranny's in Reverse...

[cadillackid]

Originally Posted by haz.matt.1960

That might be it:



Cruise only works when the tranny's in Reverse...

ha!! if you can drive a bus at the minimum, set speed of 35 in reverse I want to come and watch!

[HazMatt]

Originally Posted by cadillackid

ha!! if you can drive a bus at the minimum, set speed of 35 in reverse I want to come and watch!

Yee-HAW!!! 🤠