Ipr socket

[Sp6saz]

Where can I get an ipr socket for a dt 466e 7.6l

[ewo1]

Originally Posted by Sp6saz

Where can I get an ipr socket for a dt 466e 7.6l

DIY- deep impact socket, cut out the notch to fit over the IPR.

[cadillackid]

Originally Posted by ewo1

DIY- deep impact socket, cut out the notch to fit over the IPR.

is the DT IPR different than the T444E? on the 444E I just took the solenoid nut off, slipped off the solenoid and used a long deep well socket over the rest of it.

[Jolly Roger bus 223]

what size is it?
a standard o2 sensor socket is 1-1/8" with the slot already in it?
at least on a chevy exhaust.
i think others as well

[johnbloem1974]

Originally Posted by cadillackid

is the DT IPR different than the T444E? on the 444E I just took the solenoid nut off, slipped off the solenoid and used a long deep well socket over the rest of it.

Yup! That's exactly what I did with my IPR on my DT...

John

[cadillackid]

I know on the Later trucks.. the 6.0 and maybe the 04+ 466E is the same way you cant do that but I figured the earlier ones are the same

[Sp6saz]

Originally Posted by Jolly Roger bus 223

what size is it?
a standard o2 sensor socket is 1-1/8" with the slot already in it?
at least on a chevy exhaust.
i think others as well

It's 35 mm or 1 3/8" and being like yourself plus getting sick of trying to find parts, tools, for an international cuz they try to keep everything secret and expensive I took a Toyota axle nut tool I bought for my sons Toyota tacoma and I cut a slot in it. And let me tell you it worked like a dream and I saved at least $70.00 on that damn socket.

[Sp6saz]

Originally Posted by cadillackid

is the DT IPR different than the T444E? on the 444E I just took the solenoid nut off, slipped off the solenoid and used a long deep well socket over the rest of it.

Yeah, they put a darn snap ring in the back of the selonoid I don't think you could get it off outside the vehicle never mind in the little spot they stuffed it in. It's 35mm or 1 3/8" I used a deep well 35mm socket I bought for my sons Toyota axle bearings I cut a slot in it and it worked beautifully.

[Sp6saz]

Next question is if the middle 0 ring on the ipr is almost ripped in half will that leakage past that middle 0 ring all the way out to where it mounts cause a problem with the valves operation

[Dbacks2k4]

This is where I bought mine. There's a couple different variations depending on your actual engine year and model

Freedom Racing Tool and Auto, LLC
www.freedomracing.com
Phone: 641-784-TOOL(8665)