Hi all, been lurking for a long time and need to post now that I finally own a bus!
Bus: 2000 BlueBird All American, RE 8.3 ISC, MD3060, 157k miles.
I just purchased our bus last week and drove it home over 2,400 miles with no major issues. I parked it in front of our house and then went out the next day to move it in to it's spot where it will be converted. It fired right up, I put it in drive, drove it 200 feet, and the bus sputtered and shut off. I towed it right back to where it was, and now it won't start. It will turn over, but will not fire.
I have tried to make sure that all windows and doors are closed as they should be. I have fuel pressure at the filter, I also loosened one of the fuel lines going to the motor and cranked it over, plenty of fuel getting there(at least I think it's plenty of fuel). I'm not sure what else could be the issue.
Any help or guidance would be amazing! I'm pretty handy around an engine, but this engine is new to me and I don't know all the quirks or things to check yet.
Thanks in advance!
Josh
Linear Mode
