Thanks @Danjo - I figure the schematic you have looks like the one I just attached here? Let me know.
If it is correct, I looks like I just have to relay spots 10 & 11 together to make the flasher think the emergency door situation is ok. Am I way off base here?
I'll need to have some sort of amber or red flashers operating as hazard lights in order to pass inspection in a few months.
You got me thinking though, my plan is to have the front and rear upper outer lights be amber leds wired to the emergency switch which has the 2-stage rocker - so that would need to go through the flasher box in spots 2 and 4 (if that's the right schematic). These would be my hazards.
For the upper inner lights I'm going to run white leds for bright auxiliary lights, and wire front and rear to separate rocker switches. Since I don't need these to flash I figure I can bypass the flasher box and go directly from switch to light. Does that sound right? Will I need to do another relay in the flasher box to make it think it has something in spots 1 and 5?
It's a good thing I'm a nerd or I'd be frustrated by this stuff.
Thanks!