Heater delete help?

[Cerax]

Hi all,

Trying to remove our back heater. I know there's a lot of discussion on this, and we've considered it carefully, but we did decide we want it out.

Watched a lot of videos online and read about it here, but we're hitting what I think (?) is two problems.

#1: The electrical wires aren't an easy delete, or disconnect. As this is our first foray into this type of thing - any insight on removing them would be appreciated, don't want to brick our bus and be unable to start.

#2: We can only find one shut off valve.

This Imgur album better explains / shows pictures : https://imgur.com/a/Klbxk5E

Any help would be appreciated!

[magnakansas]

Cerax telephone me, 785 207 7600

William

[Cerax]

Just got off the phone with magnakansas, was a huge help. Thank you again!

[KeyHan15]

Originally Posted by magnakansas

Cerax telephone me, 785 207 7600

William

Magnakansas I was wondering if I might as you a few questions. I have a 2010 International 7 window bus with the DT466 and the Allison transmission. I'm wanting to delete the back heater and the front door heater and keepnthe driver seat heater. My main question is when I make the loop to eliminate the pump, I actually have a line that comes out of my pump goes to a filter which on the other side goes to my fuel tank. Will that loop eliminate the pump all together?

[magnakansas]

Key Han. Telephone if you can. I am unclear about the parts you describing.
785 207 7600

William