So at 3AM this morning I start feeling a little 'not so cold'... So I got up to turn the temp down by rolling my dial to blue and realized not much air was being blown out.
Shut it down and almost ordered a Motor from Amazon. Did some research on YouTube - turned my cage fan by hand - it rolled fine ... So crawled up top and removed the cover and saw ice - my cage fan was not drawing enough air and it froze the coil up... (I'm not low on refrigerant).
Pulled the Condenser fan off with a 5/32" Allen and pulled the 2support leg screws for the motor and 5 Plate screws holding it to the unit and found this...