|
Gutted my Electrical
Just to be clear, I removed all the electrical from above the driver's area, not the whole bus. I'm crazy but I'm not stupid.
Yes, I labeled everything before doing it. What I thought was pretty cool, was that after I got it all out I wanted to see what would happen when I turned the key. To my surprise it started right up and ran fine!
I'm moving about six switches from above driver's area to down on the side panel, repurposing the eight-way alternating flashing lights and going to run everything in individual harnesses so it's easier to identify and work on.
I took a picture all laid out. Pretty cool.
|
Linear Mode
