E450 suspension and alignment
I have a 2019 E450 motorhome chassis that I have the same problem with. It is about 3 inches low in the front. I made spacers out of pipe and round plates and used 20 mm x bolts 250 mm bolts. It wound up perfectly level from one end to the other but I can't get a 3.50 deg. camber sleeve installed. It bumps against the axle before I get it all the way in. With the factory sleeves I took out it has four degrees positive camber. Of course, I'm trying to get it back closer to 0 or ¼ deg. Positive. It looks like I might have to get dropped radius arm brackets and dropped axle pivot point brackets. I used to do this on E 350s down to 150s everyday and never ran into this problem. I have to take it to a welder Monday so I'm having to put it back to original to be able to drive it.
Can you give me a complete list of all the parts that you used?
Can you tell me how to send photos of the problem?