Used a Ball Pein Hammer & Wood Block to flatten, then dent the holes. Palm & block sanded w/ 60 grit. Pollen was removed from surrounding area using
Predrilling sixty-four 5/64" pilot holes. Final cleco size will later be 12/64" aka three-sixteenths.
After 20 minute dry time, jitterbug sanded fiberglass with 60 grit then repeated with second fill & sand coat. A third coat was required on a few hole
Taped underside of holes with aluminum tape. Then filled holes with fiberglass bondo. Work fast. Hardens fast. Scrape excess while drying.
Used a Ball Pein Hammer & Wood Block to flatten, then dent the holes. Palm & block sanded w/ 60 grit. Pollen was removed from surrounding area using
Wirewheel removed the bead of hard calking.
The black goo peeled off by hand with scraper. The hard white bead required a couple sharp razors and patience.
Moments after removing the hatch.
DeMac

Used a Ball Pein Hammer & Wood Block to flatten, then dent the holes. Palm & block sanded w/ 60 grit. Pollen was removed from surrounding area using

There are no comments to display.

Photo information

Category
Skoolie Forum Albums
Album
Convert Hatch to AC & Roof Patch
Added by
DeMac
Date added
View count
227
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top