rubber

Hello all! Anyone have a line on the retro window seals for Winnebago? 1988 Elandan and the window seals are all shrunk up. I am attaching a couple of pics from the old Winnie catalog that now is obsolete. The ones I have look like "A" in the Slider Window seal and "A" in the Vinyl Glass Seal...

Hello all, I am new to the high low trailer bunch and my buddy and I each picked one up, is a 1990, and mine 1989. I have an aluminum roof and he had dry rot in his roof which was a rubber membrane. Is there a way to get a hold of the metal roof to retrofit his unit with the same aluminum roof I...

Hey there - I’ve had ‘interesting’ experiences with the Morryde Independent Suspension rubber shear springs on my 2018 DRV Mobile Suites and the resolution may prove useful to others. The suspension system is based on swing arm movement controlled by rubber shear springs mediated by shock...

Hello everyone! I need help with replacing a seal in my camper. It’s a Keystone Passport 3290 BH. My top seal seems to have cracked. I’ve searched to find a similar looking d seal but can’t seem to find one. I uploaded pictures of the seal so you can see how it looks. If I can’t purchase the...

Does anybody know of a source for window seals, molding, and weatherstripping for our beloved busses? I have a 2000 Bluebird All American rear engine bus that has the bigger transit style windows. I removed about half the windows and the few I am keeping I would like to replace all the seals...

The black rubber trim around my E250 '97 wheel well pulled away from the frame in our 105 degree heat. What is the best adhesive to re-attach?

So I bought this epic bus, to turn into a house. However, it's kind of custom made by TurtleTop. I noticed that one of these is broken, and I don't even know what these parts are called, or what they do for the bus. I was wondering if anyone had any information on these parts, or has dealt with...

Hello, this is my first post, so advance apologies for any forum etiquette mistakes of mine. In April of 2021 I purchased my 40ft Carolina Thomas school bus, Cummins front engine. She's a beaut. My boyfriend and I have been gutting her since (the seats had already been removed but the previous...

Apparently the single piece, T-shaped rubber floor mats for the Sprinter Chassis Class C's (like our Tiburon 24TT) are only available in a 2 piece design configuration. In the UK, they have the single piece to cover the entire front floor areas, but not here. Has anyone looked and been able...

I sure hope I can describe this so you guys know what I'm talking about. I recently acquired a Cruiser that is in fantastic shape. Looks like the previous owner didn't store it under cover full-time so there is some oxidation on the sides/back and I expected I would need to do some chalking and...

A thin black piece of rubber was rolled up in my Owners packet/pouch recvd from Dealer. Any idea what it’s for? It has a circular cut out and 2 crisscross cut.

Hi, We have started the demo work on a 1997 BBAA with the FE 8.3 Cummins, and we have finally started removing the floors. I was pleasently surprised to realize that there was no plywood under or floors. The rubber is just adhered directly to the metal floors. I was excited to learn that we...

Got a new project delivered. Not sure what year though? Got it delivered on Saturday and stripped down Sunday! Had a sink and stove, but did not see a furnace. I am thinking to do the following and appreciate any advice for this build: Make it a shell that rest on the truck's bed rails Chop...

I removed to doghouse for noise insulation to the floor and on the engine side of the doghouse, but I am not certain how to put the doghouse back. It is a 1997 E350, 7.3 diesel. Option 1: the metal edge that sticks up from the floor inserts into the fold of the rubber seal. This requires the...

I'm working on a 2003 Ford E450 Collins bus I took out the windows thinking it would be a good idea to clean them out and reseal as others have suggested. Upon doing that, I saw that there are black rubber or foam tubes (I can't exactly tell what the material is -- I'd say more similar to...

Yeah I just wanna know if anyone has tried this: I was thinking of pulling up just enough of the rubber floor to find the seams of the plywood and then Use a heavy duty box cutter/laminate tile cutter to cut the rubber along the seams and then just going straight to lifting up the plywood. Just...

I have an 85 Thomas and the thin weather strip around the glass on side windows has shrunk. Any ideas? Should I replace the rubber or is there an effective alternative? Mostly one corner on each windo has "popped out" the rest is intact. Thanks in advance!

OK, so I searched and I can't believe I didn't find any thread about this. Here's my problem with my 88 Jayco DM26. The window weatherstripping is made in two pieces, with one piece that fits into the opening and a second piece (sort of a 1/4-circle shape) that snaps into the first to keep the...

I am replacing the rubber pads that the shell rest on when closed as I have a a couple that are split in half . So it's time for new rubber. I bought a 6" x 6" rubber block of Amazon for 5.00 bucks I think it was a good price. I will include a link to it as well as some pics...