seat

Hello ! We bought a partially converted 2006 International BlueBird, which unfortunately doesn't have a driver seat. The previous owner threw it out and put a sofa there instead :/ We're trying to find a good price on an Air Ride seat, ideally not to buy it new. We are currently in Bend...

We have a Thor Four Winds 24F 2022. The Dinette seat cushions are already collapsing down after a year and 1/2 of using the rig. Is anyone else having the same issue. Was thinking of pulling the foam out and putting better stuff in. Any suggestions on a good foam that doesn't cost an arm and a leg?

To all, We are looking at a new 2024 Thor Chateau 25v, and wondering if anyone has upgraded the front driver/passenger seats? Considering the drive time they'll get, I was surprised it was just a manual front back lever cloth seat; when a new truck has leather built in heat/cool and multiway...

Freedman Foldaway Double Seat for Converted Van or Skoolie Bus Conversion - $1,800 Barely Used - Like New (MSRP $2,545) Located: Leesburg, Florida Double seat for converted van or bus conversion. Double Mid Back BV Foldaway Bus Seat in Black Cloth with 3-Point belts. The BV Foldaway gives...

Just bought my first class B (yippee!), and need one more passenger seat. Ideally I am looking for the driver-side rear seat back, seat bottom, and head rest cushions. I have the base and seatbelts, just need the cushions for converting into second small bed. I planned on keeping the wardrobe...

PO had a custom cabinet made to replace the 3rd captains chair in my CS. I have removed the cabinet and can save someone a TON of money if they need it. IT is very well made by a cabinet shop and bolts to the floor using the existing studs and seat bolts I would trade it for someone's seat or...

My Adventurous seat was replaced with a custom cabinet just inside the sliding door by the PO. The cabinet is really nice and well made but I have need for the 3rd seat that came with the van. I am interested in purchase or trade for the cabinet it is very ice and much better than the Roadtrek...

I just purchased a 2021 Jayco Redhawk 31f and the drivers seat is horrendous. I could see it being ok if you were sub 5'9'' or so, but I'm around 6'1. The neck portion is off. Has anyone had luck with some sort of support to balance this out? Id rather buy something than to replace the seat, but...

After doing some research, it appears that U-Joint is no longer producing their single Sienna seat mount. I really liked the versatility of the single seat option. As of 2023, is WeldTec the only game in town with their side-by-side mount...

Greetings everyone, I am well on my way in my bus conversion project. Recently, my wife and I bought a 2002 bluebird all American rear engine and we are currently in the process of gutting the inside in preparation for a roof raise and improved insulation. While I’ve been doing this, I’ve been...

Just installed a 2004 second row Honda Odyssey seat in our 2017 25.2 to replace the peeling OEM seat. Removed the Honda sliding base. Three bolts on each side and several cables. Used a 36 inch 1x1 with holes from Home Depot cut into two 18 inch pieces to attach the rv base and seat together...

Hello Seeking to replace plush sheepskin covers that came with the SMP, came with the vehicle when purchased used in 2008. The original manufacture no longer produces these seats. I like the back with its deep pockets for holding maps. Thank you

Hi! I did a search and didn't find anything. I'm looking at buying a 1984 International 1700, but ran into a problem where I'm too fat to steer it, and the seat is already pressed as far back as it will go because of where they put a wall. If anyone has driven a similar make/year I'd...

My name is Matthew and I just purchased a 2017 Thor Windsport 31S. We absolutely love this RV and we are ready to go camping in it for the first time this weekend. We do have 1 issue though. The power seat function for the driver seat is non functional at the moment. Its at a shop and the wiring...

Good morning, I am cleaning out the garage and bus today. I have the driver seat out of my 2000 Bluebird All American bus that is in good condition with air ride slider base for sale. I replaced it with a conversion van seat with a swivel because it fit my floor plan better and my bus already...

I am adding a couple seats for passengers in our bus. My floor plan and layout needs 2-3 2nd row seats from a 2011-up Toyota Sienna Limited van. These seats are actually recliner seats not just reclining backs. I am having trouble locating these seats at a reasonable price. If anybody can help...

I am looking for a rear seat for a child seat. Preferrable one that would mount in with no fabrication. What do you guys have? I am located near Seattle but would be willing to drive a bit for the right seat. I have 2 Sienna seats in the garage, would also take a floor mount for one of these if...

Pulled out the wardrobe for a short trip with additional people and decided we could use a third seat on occasion. Other model years may work, I am told.

Free brownish-gray seat given to us but we are unable to use it in our Sportsmobile. Seat shows some wear but generally in good condition. Standard pocket on back of seat. Located in the Sacramento, CA area.

Fold down setup for econoline van. Comes with some seatbelt hardware..150$

Hi, I have the Transformer convertible platform bed, with cushions and a folding seat that I got from someone else here... I went with a different arrangement, so I'm passing them it on. The seat is from an Expedition, and when folded flat it is at the same height as the platform, which makes...

I have a 2020 Sprinter 144" 4x4 that I'm starting to build out. This is a short roof van and already has a Sportsmobile Penthouse installed. I was planning on installing the Travois 2 rail floor with RnR seat/bed. Problem is the Travois system is very difficult to get right now. Any suggestions...

Hi all, we have a 1997 Roadtrek Popular (love it). The driver's seat is pretty worn out but the passenger seat is still in good shape (I often use it for my daily driver). I'd like to swap the seats. Does anyone know how to remove the seats? I see the big nut on the swivel post centered...

Just bought my new (1995) Roadtrek 190 Yesterday! Been looking at Vans for a year. Came to the US for a visit from my home in Italy (expat) and could not get back so...got a van now rather than later. Plenty of time to renovate. :trash:

Looking for a used or inexpensive driver seat for my 1970 ChevyC-40/Thomas Bus. The original is worn out and only has a low back, need something more modern with more support Etc. thanks