tools

  1. JA

    95 Thomas inch or metric

    I’m going out to New Mexico next week to buy my bus. What tools should I bring? I am an airplane mechanic so I have a lot of good inch tools but not much metric. It is a 95 Thomas rear engine with 8.3. I am hoping to not need any tools on the trip back, but it’s free to bring them.
  2. MO

    Tools Question: rent or buy?

    Hey guys! I'm about to start my conversion, and I know I'm going to need a LOT of new tools (the only power tool I have right now is a drill lol) I don't have enough in my budget to buy as many as I'd like outright, so I wanted to ask: what tools have you used the most consistently? And which...
  3. TI

    Water Pipe, Tools, and Fittings

    I'd read most of the threads about replacement toilets and finally purchased one, but I'm still a bit lost on the best "pipe," tools, and fittings to use moving forward. I'm certain the Monty will need more plumbing repairs in the future, and I want to fix my well and use that water for...
  4. Corbi

    Tool Boxes and storage

    Greetings, I’m at a point where I need a larger toolbox-over a year, I’ve collected quite a range of hand tools and drill bits. The upper tray stores screwdrivers, pliers, chisels etc. the box itself holds bulkie items such as a hammer, rasps, discs, large screwdrivers, vise-grips, small saws...
  5. AT

    Crimper for sale

    My bus is up and running so I no longer need this crimper. Worked great for me. I'm offering it for $50.00 plus shipping. If you're driving on I-40 I'm located in Amarillo, TX so shipping could be saved. SG Tool Aid SGT18840 Terminal Crimper with Rotating Die Set for 8-4/0 AWG Uninsulated...
  6. DogMan635

    Tools for the Road in an RV during Emergency Repairs

    So anyone has a list of RV brake down tools? I am a bit of a DIY kind of person and I can put together a tool Box. I'm going from a Class A to a Class B, So my thoughts are not so much as before. But what to keep and what to add? Also, I went to local Book stores to try and find a repair book...
  7. MY

    Front basement storage question

    I have a 310GK, and the front storage (basement) area has on several threads been used as a "garage" area and sorted as such. Question is, how much weight can one store in this area safely? I have a mechanics toolbox (3' wide c/w drawers) to store tools and would like to put in this front area...
  8. DO

    Top Ten List: RV Tool Bag "Must-Haves"

    I'm putting together my tool bag for our new travel trailer and while mentally running through the different roadside repair scenarios I've done on cars in my past, I realize the RVer must be prepared for a variety of tasks across multiple systems, which may be performed in settings with more...
  9. rynosback

    Newest tool edition

    Some molding and panels were a little loose. Not anymore. :D
  10. graceashlynn.arts

    Best Emergency Tools

    Heyo! I just started my build, but with Christmas nearing my family wants to help me out by buying some equipment I'll need on my travels. I was looking at a jump starter/air compressor combo (https://www.walmart.com/ip/Stanley-J5C09-1000-Peak-Jump-Starter-with-Air-Compressor/13035281) and...
  11. WanderlustExistence

    Must Have Tools/Supplies

    Top 5 to 10 tools/Supplies you must have when building a skoolie: GO!
  12. FA

    Essential Tools?

    If you were to create a tool kit of the bare minimum tools that you would keep with you for checking on things, general maintenance, and making repairs to your (especially older) Sunlines, what would you include?
  13. BowserJournal

    Air compressor used for tools/tires?

    Since my bus has air brakes can I hook a hose up to it to fill my tires with air and run air tools? Will this cause damage to the system if I do?
  14. Otter-SMB

    The smaller the better

    I'm always looking for small, quality, multipurpose tools I can carry in my mobile tool bag. I especially like ones that let me work in spaces with limited room. You know, the situations where even a stubby screwdriver is too big? I found this little tool on the website Grommet and it's great...
  15. karrlot

    Pros/Cons on Types of Paint Sprayers

    I am looking for thoughts on different types of paint sprayers. I would like to spray my bus because that seems like it would be a nicer finish. However I do not have a sprayer yet. I already have a 30 gallon air compressor so I can use that if needed. In addition to my bus it would be nice...
  16. MI

    Heard about this site from another

    Hello I'm Noobie! ... was hanging over on another forum when a member (doctressjulia) mentioned this forum. I have no idea if her name is the same here but ty. I am specificly looking for used mini buses and designs that fall under $3000 for just the bus but preferably $1200 - $1500 as most...
  17. LU

    To-be bus owners lost in buslandia

    Hey all! My partner and I have been doing our research on buses for a couple of months now. We plan on buying a short bus this summer and getting it winter ready by well,... winter :] Here's what we have i mind: Bluebird 7.3L diesel short bus (27-30 passenger) anywhere from 1999-2003 model...
  18. SylviaW

    What are your "must haves" and "nice to haves" for new small trailer?

    What are your "must haves" and "nice to haves" for new small trailer? Hello, I'm a lifetime camper in pop-up trailers and tents. Previously owned a pop-up. This is my first post but I've read dozens of others here in the Jayco Owners Forums and learned a huge amount. Your experience and...
  19. MI

    Crank Tool clamed to pass thru wall??

    I have a long crank handle with a question mark shaped hook at the end that is clamped on the pass through storage wall. It was there a year ago when I bought the Voltage 3305 new and I have no idea what it's for? I thought maybe it was to use on my awnings but I can't see place on the awnings...
  20. DA

    How do I get r?ust off the floor of the bus?

    Hmm..... what's the right tool? Jitterbug? Pad sander? Grinder? Steel wirebrush? I know! Sharks! With frickin' laser beams tied to them! Have you ever seen one of these before? I don't think I even want to know what one costs. A kilowatt laser!
  21. mkrof72

    Self tapping screws on exterior of 2015 Raptor

    Hello, does anyone know what tool is used for the exterior self tapping screws on 2015 Raptor? I thought is was a T-20 Torx but nothing fits. Any help appreciated.
  22. JW

    Best tools for removal of ceiling and wall skins?

    While I at first had no idea that taking those skins and walls off was even an option, I'm now convinced it's the way to go. SOOOOO......I'm super grateful to have a helper coming who will put in several days of hard work on the removal of the ceiling and wall skins (this helper happens to be my...
  23. DA

    Helpful websites for Thor components

    I have been searching the forum for website links pertaining to replacement parts/neat upgrade ideas. I have not seen any. Please share some websites with some descriptions and the use of the items. Perhaps we can all use this as a guide and safe some time with research. Thank you all
  24. FE

    Jumping in headfirst with no knowledge

    Hey Y'all, I haven't purchased a bus yet. Hopefully, I can acquire one in the coming months. I am in the pre-purchase planning stage, if such a stage exists. I just decided to do this yesterday. I have no construction experience or any bus knowledge. :confused: I have a couple friends that...
  25. Bikester

    Top 5 Things I need for a MH

    Hey all, I'm looking for the top 5-10 things that I need for my new MH that I probably don't have from my TT days. You know, gadgets, tools, safety equip, maybe Class C specific, even nice-to-haves, etc. Example: I just ordered a good Air Compressor after looking at another thread (maybe I...

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top