Anybody recognize these wires?

[kromboy]

So on both sides of my bus, I have these thick black wires with a 6 pin plug.

I suspect that they're the rear flashers, one side was already cut and the other side is in tact. Just wanted to see if anyone had any experience with these on a blue bird to confirm one way or the other so I can cut'em off.

Trying to avoid taking the whole rear panel off to trace them if I can.

Thanks as always!

 

[desrtdog]

So on both sides of my bus, I have these thick black wires with a 6 pin plug.

I suspect that they're the rear flashers, one side was already cut and the other side is in tact. Just wanted to see if anyone had any experience with these on a blue bird to confirm one way or the other so I can cut'em off.

Trying to avoid taking the whole rear panel off to trace them if I can.

Thanks as always!

If the wires have a number on them, you should be able to track them down from Blue Bird wiring diagrams on vantage.blue-bird.com

…or not… just looked at the pic again and they seem to be a single cable. Still may be worth a try…

 

[kromboy]

Unfortunately they're not numbered, but I did just find another one of such cable that goes up to the front driver's side that also seems to have been cut, and since the only thing up there on the upper left side is the flashers, I'm fairly confident.

They did decom the flashers and the stop arm before selling it so I guess I can't really go wrong with disconnecting wires that have already been cut. I may leave the one going to the rear and see if I have a reason to take the panel off to confirm down the road.

Actually, on that note, I can't imagine why they would've just decom'd half the flashers, maybe they just cut it and stuffed the cut cable somewhere so it may be worth tracing, that's how I came upon the cut wire in the front, it was stuffed into a little nook.

 

[nikitis]

Could be a 8-way flasher harness. It looks similar to mine.

I just got done tracing mine as there's an 8-flasher thread now talking about this. I traced some wires that looked very similar to my flashers.