Hazards and turn signals not flashing

[Eric-Kracker]

I’m having an issue with my 93’ blue bird tc2000, I’ve removed (extremely carefully) all wireing for speakers, emergency exit switches, inside lights, a/c and heater units, when I tested to make sure my running lights, head lights ect. were working all came on but my hazards and turn signals were NOT flashing, I can’t seem to find a fuse box, and thought maybe there is a flasher relay somewhere that is bad. Can anyone help me, I need to move from Florida to Illinois in two weeks.

 

[Dbacks2k4]

I’m having an issue with my 93’ blue bird tc2000, I’ve removed (extremely carefully) all wireing for speakers, emergency exit switches, inside lights, a/c and heater units, when I tested to make sure my running lights, head lights ect. were working all came on but my hazards and turn signals were NOT flashing, I can’t seem to find a fuse box, and thought maybe there is a flasher relay somewhere that is bad. Can anyone help me, I need to move from Florida to Illinois in two weeks.

Are they coming on and staying lit (e.g. on but not flashing) or not coming on at all?

If they're just not blinking there is a flasher module that should be in the fuse panel to outside of the drivers seat although I don't specifically recall where in there, it's been a while since I owned my old 97 Bluebird.

If they're not lighting up at all then it could be a variety of things, fuse in that same panel, a missing ground somewhere, shorted wire, etc...

 

[Eric-Kracker]

Thank you! I will look into the flasher module and double check the ground with the wiring.