Installing the overhauled 5.9 with the Rebuilt AT545 firmly bolted on

[Rivetboy]

It took 5 months but next Friday awaits...

 

[cadillackid]

beautioful!!!! thats eye candy to me!!!! this bus is gonna be ready to roll some serious wheels
-Christopher

 

[ben2go]

I sure feel better knowing you'll be riding behind a fresh drivetrain. Unfortunately, reliable drivelines kill some adventure and McGyver moments.

 

[Rivetboy]

We are looking forward lots of miles with the comfort that only a hands on ownership mental checklist can give you.
And being able to fix it if it breaks!
Hopefully, it will run good right out the gate so my focus can change gears and get my wife out here to the shop with a roll of masking tape and her sketchbook.
I am enjoying the hell out of this.

 

[KGZ91]

how much it cost you to rebuild it?

 

[cadillackid]

Building stuff is a Blast!! I totally dig building stuff myself, and watching others do it..

 

[Rivetboy]

Easy 800 man hours and about 5K

 

[Rivetboy]

And thosands and thousands of dollarrs in tools

 

[Rusty-SKO]

And thosands and thousands of dollarrs in tools

Them are the perks.

I love an excuse to get a new tool.

Motor looks GREAT ! I hope you get a helper to guide it in.

 

[Robin97396]

Doing work like that... we're going to have to start calling you rivetman.

 

[KGZ91]

that is some serious dedication LMAO.anyway i hope you get more than 5mpg with this setup :

 

[Rivetboy]

Thanks for all the kind words.
Am really looking forward to it moving under its own power.

 

[Rivetboy]

The secret

On a Blubird TC 2000 with a 5.9 Cummins and a AT 545 together remove the right side engine mount and hoist in engine. ( or remove)
This will cause great happiness to all near and far.
Replace mount, bolt both sides down and install front mount.
Go home early and drink beer.
The picture with the hoist is holding up the front of the engine after the 2 rear rubber mounts were snugged and installing the front mount.
Could not get that engine installed picture to stand up
sorry.

Now , the "El grande" punch list. Wiring, supplemental trans cooler, hook up trans, driveshaft etc...
The kind, wherever you look, you see something else to add to the list.

 

[Rivetboy]

hahaha

The secret
On a Blubird TC 2000 with a 5.9 Cummins and a AT 545 together remove the right side engine mount and hoist in engine. ( or remove)
This will cause great happiness to all near and far.
Replace mount, bolt both sides down and install front mount.
Go home early and drink beer.
The picture with the hoist is holding up the front of the engine after the 2 rear rubber mounts were snugged and installing the front mount.
Could not get that engine installed picture to stand up
sorry.

Now , the "El grande" punch list. Wiring, supplemental trans cooler, hook up trans, driveshaft etc...
The kind, wherever you look, you see something else to add to the list.
Attached Thumbnails


This is what this site used to be about not so much anymore

 

[joeblack5]

I agree that this site has changed, overrun with the busbug people.
Nice pics. for alotof people I guess only pictures of the finished project are interesting and not the how much work it was to get there. Then people do not take the time to appreciate the documenting and pictures of a thread. Not very motivating.
At last this must be the last site that is unable to post pictures in the correct position. It discourages people from putting pics up..to much work...or maybe the site does want to limit the bandwidth?

Johan