ISO lower taillight covers 2000 BB tc1000

[Hutchy-SKO]

My lower taillights don't have covers so I had to remove the bulbs, any leads on replacements would be greatly appreciated 2000 BlueBird tc1000

 

[fo4imtippin]

Swap to LED.
Partsam 2Pcs 7" Round Transit Tail Lights Red 36 LED, 7 Inch Red Bus LED Light Round Truck Tail STT Stop Brake Turn Lights [Built-in Reflex Lens] Trailer Truck Taillight with Weathertight Gasket https://www.amazon.com/dp/B098QLBVQR/ref=cm_sw_r_apan_glt_i_3X3K9TKJ1PCQMPJDN61P


If you want to replace, take the wiggle light and swap it. If you have to buy, mine is a Weldon 1010
https://www.unityparts.com/1-1003-weldon-7-red-lens-only-for-1010-series/

 

[Hutchy-SKO]

Swap to LED.
Partsam 2Pcs 7" Round Transit Tail Lights Red 36 LED, 7 Inch Red Bus LED Light Round Truck Tail STT Stop Brake Turn Lights [Built-in Reflex Lens] Trailer Truck Taillight with Weathertight Gasket https://www.amazon.com/dp/B098QLBVQR/ref=cm_sw_r_apan_glt_i_3X3K9TKJ1PCQMPJDN61P


If you want to replace, take the wiggle light and swap it. If you have to buy, mine is a Weldon 1010
https://www.unityparts.com/1-1003-weldon-7-red-lens-only-for-1010-series/

I'm talking about the lower smaller one but thanks for the tip

hat unity site looks awesome thanks!

 

[fo4imtippin]

The license plate light is Grote 5086 with 9023 lens.
https://shop.advanceautoparts.com/p...red-50862/10665653-P?searchTerm=grote+4"+stud

 

[Hutchy-SKO]

The license plate light is Grote 5086 with 9023 lens.
https://shop.advanceautoparts.com/p...red-50862/10665653-P?searchTerm=grote+4"+stud

is it this lens?
https://www.unityparts.com/90232-grote-4-red-lens-only-for-50852-stop-tail-light/

 

[fo4imtippin]

Looks like it. Mine has 9023 printed on the lens.

 

[Jolly Roger bus 223]

i replaced all of mine with the partsam lights and or powertronics which i got through my local oreillys

 

[fo4imtippin]

Yeah, i wrote all mine down to source new lights to replace when i paint. I already put new LED headlights in. Ill get new marker lights because those are all sun cracked. I havent decided if ill replace the blinkers and stop lights with LED's. Its possible the low draw will require a resistor or something. These only run with the engine running, so no battery savings. Anyone else have any pros to replacing LED taillights if there's nothing wrong with the current ones? Looks like price is roughly $40 per set.

 

[Jolly Roger bus 223]

none of the leds i changed to required a resistor or anything.
they were pretty much plug and play