Run your bus off wood

[soused moose]

While searching around for cool websites to add to our list of links … I found one titled.

Construction of a Simplified Wood Gas Generator for Fueling Internal Combustion Engines in a Petroleum emergency

This is amazing stuff…check it out.
http://www.gengas.nu/byggbes/index.shtml

 

[lapeer20m]

it's been done! Around WWII it was a reasonably common thing in europe

 

[soused moose]

Here’s another great site….
http://www.builditsolar.com/

 

[soused moose]

While researching my section on Home Brewing Beer and Wine for our links site … I ran into a few interesting ones on distilling liquor …
Here’s a really good site on making and using ethanol

http://running_on_alcohol.tripod.com/

 

[drclue]

Howdy All

We are currently building the unit needed to power internal combustion engines on wood.
You can watch our progress in researching and building the wood gasifier at
http://primus.drclue.net/Power/WoodGas/index.php

The most complete instructions on the site relate to the downdraft gasifier
outlined in FEMA documents , but the one we are actually building is a
cross-draft version.

I've re-done the FEMA drawing , correcting some of it's errors and
at the same time I've rendered companion drawings to have coverage
for updraft , downdraft and side draft versions.

As things move forward , I'll be giving details on how and why it works ,
so that one can more readily adapt the information to whatever materials
you have laying about.

There is really only one item for which the measurements are somewhat critical
( The burn tube ) and I have charts detailing the dimensions required for various
horsepower/displacement requirements.

If your reasonably handy (which most bus people tend to be ) then this
project should be a reasonable undertaking.

--Doc



requirements.