Transmogrifie and Me

I don't really think that weight is an issue. A spinet weighs 300-500lbs, not all that much in the greater scheme of things. Looking at
todays average person that's only 2-3 people. I would definitely add something to my plans that is that much of a part of your life.
 
Transmogrifie, The Piano and Me

Thank you to everyone for your support. I feel sooooo much better now regarding the piano.

Yesterday I took off due to the holiday. Friends all going places but I spent a good sunny afternoon with the bus, friend brought me a doggie bag. Getting the rubber nearly 95% off now. Tested some Rust Reformer on a big spot of pitted rust. Also tested some stripper that if I get the timing just right it takes the glue (and paint) up slick. By hand this has become a long job. My body is telling me I overdid a bit but that's a good thing really. And a sense of accomplishment of how far I have gotten sans electricity. 8)

Hope everyone had a grand Turkey Day. And I have to say thanks for my health, my friends and for the troops who didn't make it home yet.
 
Re: Transmogrifie, The Piano and Me

Shadoll said:
Thank you to everyone for your support. I feel sooooo much better now regarding the piano.

Yesterday I took off due to the holiday. Friends all going places but I spent a good afternoon with the bus, friend brought me a doggie bag. Getting the rubber nearly 95% off now. Tested some Rust Reformer on a big spot of pitted rust. Also tested some stripper that if I get the timing just right it takes the glue up slick. By hand this has become a long job. My body is telling me I overdid a bit but that's a good thing really. And a sense of accomplishment of how far I have gotten sans electricity. 8)

Hope everyone had a grand Turkey Day. And I have to say thanks for my health, my friends and for the troops who didn't make it home yet.

post some pictures of your progress, i like to see how you are doing. pulling the rubber up is a real chore
 
To date I have a little bit around the still existing benches to get up. I tried unbolting the seats but the bolts just spin, I need to find someone to put under the bus :shock: to hold the other end (as I don't have a saw). That very center is the only place where the rust is actually into the metal.

img_70028_5c2f498c68a77adaee5479d072a58e74.jpg


The seats will be coming out but as I posted before I want to turn the other bench to face this back one for a booth, however, the legs are on the wrong side if I do that. So I thought about turning the longer booth so I'd have a staggered sort of walkway and one longer booth on the other side of the table. Have to see when I get them off.

Also noted while working yesterday that there are no 'emergency' windows. I remember emergency windows when I was a kid even.

Kinda looks like everyone elses floor before painting shot. :)
 
What's the best thing to use to wash and wipe down everything before painting. I think the stripper can said mineral spirits?
 
Before painting, I like to use ammonia, either straight or diluted with water, then after the surface has dried, a wipe-down with Clorox bleach, either straight or diluted with water. Then, when dry, I paint.
 
Re: Transmogrifie, Piano and Me

Shadoll said:
In assessing my crowded 2 bedroom apartment, downsizing for the bus, and making a list of what I can sell, I convinced myself that I can part with my piano. I have a couple of people that are interested in it so in 'sprucing it up' to have them come look at it, I got to thinking. I couldn't sleep last night.

I have had this piano in my life for almost 50 years. On the other hand, I have been trying to be concious of the weight in the bus. Putting the piano in the bus would blow that out of the water pretty fast. But if I, did put the piano into the bus it will be like having an old friend in my cozy new home. My playmate, my soulmate in a sense. I searched on this site and there was another build that had the same kind of piano in the bus (along with a pop up VW bus on the roof). A few people had electric pianos installed some way or another but it's just not the same. If I didn't have my piano I would not have an electric keyboard. I'm not great at the playing, it's more a venting/comfort thing. I've tried guitar a couple of times, too bad that didn't work out.

As far as environment, I've come to the conclusion that having it in the bus won't be any different on it's well being than the few times I've had to store it in non-climate controlled storages for long periods of time, or moving it from Oregon to AZ to OR to AZ a couple of times. Then there is the tie down aspect of it all.

Besides, it would be kinda quirky and acoustic to have a piano in the bus in the woods. Would 'fit my style'.

I think I have to make it work.

Definitely put your piano in the bus. I built the inside of my bus to accommodate my instruments, amplifier, and recording studio. I have done recordings of myself and two friends. We used microphones. We got excellent results. I think that the curved ceiling greatly helps with the acoustics of the room.

I would fasten some 2X4s to the floor which you could "set" the piano into. Also you might somehow fasten the back of the piano to a wall with strong brackets. Just a couple of ideas.

There are many clever people on this forum. Perhaps someone can come up with a real good idea to secure your piano.
 
mightybus said:
Hey nanny staters(just kidding), read again slowly my post. OK?

Not everyone is as smart as you, like my ex-GF. If the potential for harm is there, a warning doesn't hurt. I read what you wrote. Personally, the smell of bleach makes me ill.
 
Shadoll said:
To date I have a little bit around the still existing benches to get up. I tried unbolting the seats but the bolts just spin, I need to find someone to put under the bus :shock: to hold the other end (as I don't have a saw)...

If you have trouble finding an assistant soon enough, you could use vice grips underneath perhaps with an extension pipe so when it spins it eventually hits a frame rail...
 
Diesel Dan said:
Shadoll said:
To date I have a little bit around the still existing benches to get up. I tried unbolting the seats but the bolts just spin, I need to find someone to put under the bus :shock: to hold the other end (as I don't have a saw)...

If you have trouble finding an assistant soon enough, you could use vice grips underneath perhaps with an extension pipe so when it spins it eventually hits a frame rail...

That would have been my next plan, thank you for the idea. Matter of fact I don't have a pair of vice grips and I should get one. My lack of tools due to having a teenage boy in the house who has now left the nest, time for mommy to restock.
 
You need this!!
http://www.amazon.com/Black-Decker-7750-2-Inch-Grinder/dp/B000077CPU

Also, I saw your reply to my comment concerning batteries. Just to bounce off of that, you are going to see SO MANY different ways of doing things. Some of them are ideas for now, some later. I started to go crazy, admiring all the complex setups and wanting them. For now, keep it simple. You can always expand later. That is why I am doing what I proposed as my setup, it's simple :)
 
JakeC said:

Again, I'd need electric. I have found that there is an outlet that I can use but it's still a good distance from the bus, so not sure if I can find a long enough extension cord. And they are going to 'charge me' for the electric I use. It's sort of a sense of accomplishment for what I can get done without electric. Electricity has made our lives much more time friendly for sure.
 
Where I used to live we had swap meets all over the place. I need to find a good swap meet. Everything is 90 miles away.
 
crazycal said:
mightybus said:
Hey nanny staters(just kidding), read again slowly my post. OK?

Not everyone is as smart as you, like my ex-GF. If the potential for harm is there, a warning doesn't hurt. I read what you wrote. Personally, the smell of bleach makes me ill.

I think that my family has reactions to bleach as well so I try to not use it even in laundry. There are so many products and chemicals on the shelf, I've been re-reading the can every time I use them because I don't remember what I read on what can. Yikes. Basically I suppose to paint you need to remove any of the sooty grease/oil from the metal.
 
Macho & Me

A guy at work told me that he could check out a salvage yard for me for stuff. We were discussing what I want to do. He actually told me that I couldn't use a saw and that I needed to find premade cabinets from a wreck or something.

Oh no no no... you do not tell ME that I cannot do...
:shock:

It might not be real pretty but... I WILL DO.

There.. now I feel better.
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top