Want to Buy: International 3000 AmTranRE Driver side Engine Door

[JasonHurst.studio]

Hello everyone,
I am in search for a Drivers side, Rear Engine compartment door for a 2001 International AmTranRE school Bus.
Please see photos for reference. I live in Missouri/KC area.
Thanks

 

[nikitis]

That's probably going to be REALLY difficult to obtain if not impossible.

You'd be better off fabricating yourself a panel from a single sheet of sheet metal.

You can cut a size out to match plus add 1 inch to the outside on all sides, cut square corners out of each corner, then bend the extra 1 inch inwards to give it depth, and a mounting surface, and screw them into the underside chassis.

Paint it and call it good. No one will know.

It'll cost you $60 in metal, vs $386 for an official sheet if you can even find one.

 

[JasonHurst.studio]

Thank you. Yeah I’m a metal fabricator and welder but time is money and my plate is full full so I was just casting out a line to see if anyone had one laying around. I’ll see if there is one available before I commit to fabricating one from scratch.

 

[nikitis]

Thank you. Yeah I’m a metal fabricator and welder but time is money and my plate is full full so I was just casting out a line to see if anyone had one laying around. I’ll see if there is one available before I commit to fabricating one from scratch.

Yeah it's always good to ask, you never know. Someone may have an obscure part, but that one will be unlikely IMO.

 

[skoontz]

Try this guy - not only did he unlock my TCM, he did sell used parts off of school busses. If I had been able to transport it, I could have bought a dash cover for my RE300 from him.


Express Equipment Sales
Charlie Ball
571-251-5811
cballexpressauto@aol.com

 

[Dbacks2k4]

If a 2005 IC re300 door is same size I may have one for you I could sell cheap in Davenport, IA. One of our buses burned in a fire, but engine bay doors are still good (if you scrub off the soot, haha).


Shipping would probably cost a fortune unless you want to make a road trip.

 

[JasonHurst.studio]

If a 2005 IC re300 door is same size I may have one for you I could sell cheap in Davenport, IA. One of our buses burned in a fire, but engine bay doors are still good (if you scrub off the soot, haha).


Shipping would probably cost a fortune unless you want to make a road trip.

I’m sorry to hear that you lost a bus to a fire. If I measure my door and give you dimensions would you be willing to compare to yours?
It would be a weekend road trip to come get it but I think I can make a it work if it fits .
Thanks

 

[JasonHurst.studio]

If a 2005 IC re300 door is same size I may have one for you I could sell cheap in Davenport, IA. One of our buses burned in a fire, but engine bay doors are still good (if you scrub off the soot, haha).


Shipping would probably cost a fortune unless you want to make a road trip.

Here are some photos for reference